Data Recovery & Backup Solutions for Brawboy

If you heard your hard drive making a ticking noise, you have a hardware issue (disconnect your hard drive right away), which is costly to fix - but in most cases we can recovery your data.

1. IC Logic Board PCB
2. Motor/Spindle
3. Physical Heads
4. Heads Movement
5. Actuator
6. Actuator Arm
7. Platters
8. Protective Cover
9. Chassis
10. Firmware Examination
11. Image Repair Drive

• Level 1 - Logical: No physical damage, Logical minor file system corruption as a result of a possible windows update, user error or possible virus.
• Level 2 - Mechanical/Logical: Disk with up to 1% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 3 - Mechanical/Logical: Disk with up to 5% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 4 - Mechanical/Logical: Disk with up to 10% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without bad sectors but with a massive logical corruption of the file system and possibly overwritten data, etc.
• Level 5 - Firmware/Mechanical/Electronic: Disk with corrupted firmware modules and with at least 1% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without physical damage but with disk encryption applied and underlying file system corruption. This level also covers electronic faults of the board PCB.
• Level 6 - Physical/Mechanical/Firmware: clean room job for physically damaged drive with either R/W heads stiction condition, or with at least one faulty R/W in the stack. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 7 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp without obvious magnetic platters damage. These jobs will be defined as recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 8 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp with obvious magnetic platters damage. These jobs will be defined as top complexity recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not – the success rate in these type of cases will be lower because of the magnetic platters damage. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption. In some of the cases only partial recovery may be possible.
• Not Recoverable: drives with excessive magnetic platters damage – usually carved rings and highly contaminated drive chamber as a result of the carved black particles. With current technology these type of jobs are beyond recovery.

The hard drive recovery process is very complex and requires a lot of specialized data recovery engineering tools and knowledge, and level 6+ failures require a class 100 cleanroom.

As a trusted engineering and product development company with over two decades of experience, we at COLETEK understand the unique challenges faced by businesses in Brawboy, New South Wales, Australia. Whether you're looking to drive innovation, improve efficiency, or simply stay ahead of the curve, our multidisciplinary team is equipped to provide tailored support that meets your specific needs. With a national reputation built on reliability, collaboration, and capability, we take pride in serving businesses across Brawboy, New South Wales, Australia by providing cutting-edge engineering solutions. Since our establishment in 2001, COLETEK has solidified its position as a trusted partner for organizations seeking innovative products, processes, and strategies to drive growth. As experts in product development and engineering, we understand the importance of effective collaboration when it comes to driving successful projects forward. Our team is dedicated to working closely with businesses based in Brawboy, New South Wales, Australia to develop solutions that meet their unique requirements, taking into account the distinct challenges presented by the region's agricultural, industrial, or commercial landscape. At COLETEK, we're committed to building long-lasting relationships founded on trust, open communication, and a deep understanding of our clients' objectives. By leveraging our collective expertise in engineering and product development, we empower businesses across Brawboy, New South Wales, Australia to overcome obstacles, seize new opportunities, and thrive in an ever-evolving marketplace. So why wait? Reach out to COLETEK today and discover how our multidisciplinary Australian engineering and product development company can support your business goals. Let our team of experts work with you to build something remarkable and drive lasting success for your organization. You can count on us as a trusted partner in your quest for innovation, reliability, and growth.