Data Recovery & Backup Solutions for Claymore

If you heard your hard drive making a ticking noise, you have a hardware issue (disconnect your hard drive right away), which is costly to fix - but in most cases we can recovery your data.

1. IC Logic Board PCB
2. Motor/Spindle
3. Physical Heads
4. Heads Movement
5. Actuator
6. Actuator Arm
7. Platters
8. Protective Cover
9. Chassis
10. Firmware Examination
11. Image Repair Drive

• Level 1 - Logical: No physical damage, Logical minor file system corruption as a result of a possible windows update, user error or possible virus.
• Level 2 - Mechanical/Logical: Disk with up to 1% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 3 - Mechanical/Logical: Disk with up to 5% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 4 - Mechanical/Logical: Disk with up to 10% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without bad sectors but with a massive logical corruption of the file system and possibly overwritten data, etc.
• Level 5 - Firmware/Mechanical/Electronic: Disk with corrupted firmware modules and with at least 1% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without physical damage but with disk encryption applied and underlying file system corruption. This level also covers electronic faults of the board PCB.
• Level 6 - Physical/Mechanical/Firmware: clean room job for physically damaged drive with either R/W heads stiction condition, or with at least one faulty R/W in the stack. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 7 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp without obvious magnetic platters damage. These jobs will be defined as recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 8 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp with obvious magnetic platters damage. These jobs will be defined as top complexity recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not – the success rate in these type of cases will be lower because of the magnetic platters damage. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption. In some of the cases only partial recovery may be possible.
• Not Recoverable: drives with excessive magnetic platters damage – usually carved rings and highly contaminated drive chamber as a result of the carved black particles. With current technology these type of jobs are beyond recovery.

The hard drive recovery process is very complex and requires a lot of specialized data recovery engineering tools and knowledge, and level 6+ failures require a class 100 cleanroom.

As the beating heart of New South Wales, Australia, Claymore is a thriving regional community that embodies the spirit of innovation and entrepreneurship. Here at COLETEK, we're proud to be serving businesses across Claymore, New South Wales, Australia for over two decades. As a multidisciplinary Australian engineering and product development company established in 2001, our expertise spans multiple disciplines, enabling us to tackle complex challenges head-on. With an unwavering commitment to reliability, collaboration, and capability, we've built a trusted national reputation among industry leaders and local business owners alike. At COLETEK, we recognize the value of strong partnerships; that's why we're dedicated to working closely with clients operating throughout Claremore, New South Wales, Australia, to bring their innovative ideas to life. Our team of expert engineers and product developers is passionate about solving real-world problems using cutting-edge technology and time-honored principles. Whether you're seeking customized solutions for your manufacturing process or looking to optimize your supply chain, we'll partner with you every step of the way to ensure that your vision becomes a reality. As we celebrate our 20th anniversary, we reflect on the many milestones achieved and the trust built between COLETEK and businesses in Claymore, New South Wales, Australia. We're honored to have played a role in their growth and prosperity, and we look forward to continuing this journey alongside you. Now it's your turn! Let us support your endeavors as you build something remarkable together.