Data Recovery & Backup Solutions for Bradbury

If you heard your hard drive making a ticking noise, you have a hardware issue (disconnect your hard drive right away), which is costly to fix - but in most cases we can recovery your data.

1. IC Logic Board PCB
2. Motor/Spindle
3. Physical Heads
4. Heads Movement
5. Actuator
6. Actuator Arm
7. Platters
8. Protective Cover
9. Chassis
10. Firmware Examination
11. Image Repair Drive

• Level 1 - Logical: No physical damage, Logical minor file system corruption as a result of a possible windows update, user error or possible virus.
• Level 2 - Mechanical/Logical: Disk with up to 1% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 3 - Mechanical/Logical: Disk with up to 5% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 4 - Mechanical/Logical: Disk with up to 10% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without bad sectors but with a massive logical corruption of the file system and possibly overwritten data, etc.
• Level 5 - Firmware/Mechanical/Electronic: Disk with corrupted firmware modules and with at least 1% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without physical damage but with disk encryption applied and underlying file system corruption. This level also covers electronic faults of the board PCB.
• Level 6 - Physical/Mechanical/Firmware: clean room job for physically damaged drive with either R/W heads stiction condition, or with at least one faulty R/W in the stack. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 7 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp without obvious magnetic platters damage. These jobs will be defined as recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 8 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp with obvious magnetic platters damage. These jobs will be defined as top complexity recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not – the success rate in these type of cases will be lower because of the magnetic platters damage. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption. In some of the cases only partial recovery may be possible.
• Not Recoverable: drives with excessive magnetic platters damage – usually carved rings and highly contaminated drive chamber as a result of the carved black particles. With current technology these type of jobs are beyond recovery.

The hard drive recovery process is very complex and requires a lot of specialized data recovery engineering tools and knowledge, and level 6+ failures require a class 100 cleanroom.

At COLETEK, we're proud to be a trusted multidisciplinary Australian engineering and product development company established in 2001. Our reputation for reliability, collaboration, and capability has earned us the trust of businesses throughout the nation, including in Bradbury, New South Wales, Australia. For over two decades, our experts have been working closely with local entrepreneurs and decision-makers to bring their innovative ideas to life. As a locally based company with national reach, we understand the unique challenges and opportunities that come with operating in Bradbury, New South Wales, Australia. We've had the privilege of partnering with businesses across various industries, helping them overcome technological hurdles and drive growth through tailored engineering solutions. Our team is committed to supporting local enterprises like yours, providing expert guidance, and leveraging our collective expertise to create meaningful impact. COLETEK's engineers are highly skilled professionals, dedicated to delivering high-quality products and services that meet the specific needs of businesses in Bradbury, New South Wales, Australia. We take pride in our ability to collaborate with clients, understanding their goals, and working together to design and develop innovative solutions that exceed their expectations. Whether you're a startup looking to disrupt an industry or an established brand seeking to stay ahead of the competition, we invite you to explore how COLETEK can assist your Bradbury, New South Wales, Australia-based business. By combining our expertise, creativity, and commitment to excellence, together we can create products that drive results, solve problems, and deliver tangible value. So why wait? Let's build something remarkable together.