Data Recovery & Backup Solutions for Terara

If you heard your hard drive making a ticking noise, you have a hardware issue (disconnect your hard drive right away), which is costly to fix - but in most cases we can recovery your data.

1. IC Logic Board PCB
2. Motor/Spindle
3. Physical Heads
4. Heads Movement
5. Actuator
6. Actuator Arm
7. Platters
8. Protective Cover
9. Chassis
10. Firmware Examination
11. Image Repair Drive

• Level 1 - Logical: No physical damage, Logical minor file system corruption as a result of a possible windows update, user error or possible virus.
• Level 2 - Mechanical/Logical: Disk with up to 1% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 3 - Mechanical/Logical: Disk with up to 5% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 4 - Mechanical/Logical: Disk with up to 10% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without bad sectors but with a massive logical corruption of the file system and possibly overwritten data, etc.
• Level 5 - Firmware/Mechanical/Electronic: Disk with corrupted firmware modules and with at least 1% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without physical damage but with disk encryption applied and underlying file system corruption. This level also covers electronic faults of the board PCB.
• Level 6 - Physical/Mechanical/Firmware: clean room job for physically damaged drive with either R/W heads stiction condition, or with at least one faulty R/W in the stack. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 7 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp without obvious magnetic platters damage. These jobs will be defined as recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 8 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp with obvious magnetic platters damage. These jobs will be defined as top complexity recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not – the success rate in these type of cases will be lower because of the magnetic platters damage. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption. In some of the cases only partial recovery may be possible.
• Not Recoverable: drives with excessive magnetic platters damage – usually carved rings and highly contaminated drive chamber as a result of the carved black particles. With current technology these type of jobs are beyond recovery.

The hard drive recovery process is very complex and requires a lot of specialized data recovery engineering tools and knowledge, and level 6+ failures require a class 100 cleanroom.

At COLETEK, we're proud to be a multidisciplinary Australian engineering and product development company, established in 2001 with a national reputation built on trust and innovation. For over two decades, we've been supporting businesses across Terara, New South Wales, Australia and throughout the country. We understand the unique challenges faced by local industries and are committed to delivering reliable, collaborative solutions that drive growth and success. Based in Terara, New South Wales, Australia, our team operates throughout the region, working closely with entrepreneurs, small business owners, and corporate leaders alike. Our experienced engineers bring a depth of knowledge and expertise, drawing on years of experience in product development and manufacturing. Whether you're looking to launch a new product, improve operational efficiency, or enhance your competitive edge, we're here to help. We take pride in our people-centered approach, taking the time to listen to your needs and develop customised solutions that meet your unique requirements. By leveraging our extensive expertise in engineering and product development, we can help businesses across Terara, New South Wales, Australia tackle complex problems and seize new opportunities. Our goal is straightforward: to build long-term relationships with local clients and deliver exceptional results through collaboration and trust. As a business leader in Terara, New South Wales, Australia, you deserve a trusted partner that understands the local market and can support your growth ambitions. At COLETEK, we're committed to being that partner, working together to overcome challenges and achieve success. If you're looking for reliable engineering solutions that will make a meaningful difference to your business, get in touch with us today.