Data Recovery & Backup Solutions for Mogo

If you heard your hard drive making a ticking noise, you have a hardware issue (disconnect your hard drive right away), which is costly to fix - but in most cases we can recovery your data.

1. IC Logic Board PCB
2. Motor/Spindle
3. Physical Heads
4. Heads Movement
5. Actuator
6. Actuator Arm
7. Platters
8. Protective Cover
9. Chassis
10. Firmware Examination
11. Image Repair Drive

• Level 1 - Logical: No physical damage, Logical minor file system corruption as a result of a possible windows update, user error or possible virus.
• Level 2 - Mechanical/Logical: Disk with up to 1% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 3 - Mechanical/Logical: Disk with up to 5% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 4 - Mechanical/Logical: Disk with up to 10% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without bad sectors but with a massive logical corruption of the file system and possibly overwritten data, etc.
• Level 5 - Firmware/Mechanical/Electronic: Disk with corrupted firmware modules and with at least 1% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without physical damage but with disk encryption applied and underlying file system corruption. This level also covers electronic faults of the board PCB.
• Level 6 - Physical/Mechanical/Firmware: clean room job for physically damaged drive with either R/W heads stiction condition, or with at least one faulty R/W in the stack. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 7 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp without obvious magnetic platters damage. These jobs will be defined as recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 8 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp with obvious magnetic platters damage. These jobs will be defined as top complexity recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not – the success rate in these type of cases will be lower because of the magnetic platters damage. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption. In some of the cases only partial recovery may be possible.
• Not Recoverable: drives with excessive magnetic platters damage – usually carved rings and highly contaminated drive chamber as a result of the carved black particles. With current technology these type of jobs are beyond recovery.

The hard drive recovery process is very complex and requires a lot of specialized data recovery engineering tools and knowledge, and level 6+ failures require a class 100 cleanroom.

With over two decades of experience, COLETEK has established itself as a renowned multidisciplinary Australian engineering and product development company. As we celebrate our rich history, we remain committed to serving businesses across Mogo, New South Wales, Australia, and ultimately contributing to the nation's economic growth. Our team is dedicated to staying ahead of the curve by continuously innovating and expanding our capabilities. This unwavering dedication has earned us a trusted reputation nationwide, allowing local businesses in Mogo, New South Wales, Australia to rely on our expertise. From concept development to project execution, we draw upon our deep understanding of engineering principles and product design to deliver results that exceed expectations. COLETEK is dedicated to empowering the business community in Mogo, New South Wales, Australia by fostering long-term collaborations and ensuring the reliability and quality of our work. Over the years, we have proudly worked with companies from various industries, helping them overcome unique challenges and achieve their objectives. Our collaborative approach and commitment to capability-building allow us to provide tailored solutions that cater to the distinct needs of each client. By leveraging the collective expertise of our diverse team, we can effectively address complex engineering and product development challenges in Mogo, New South Wales, Australia, and beyond. As you navigate the ever-evolving landscape of engineering and product development, COLETEK stands ready to offer unwavering support and guidance. With our strong roots in Mogo, New South Wales, Australia, we remain committed to serving local businesses, just as we do for companies throughout Australia.