Data Recovery & Backup Solutions for East Lynne

If you heard your hard drive making a ticking noise, you have a hardware issue (disconnect your hard drive right away), which is costly to fix - but in most cases we can recovery your data.

1. IC Logic Board PCB
2. Motor/Spindle
3. Physical Heads
4. Heads Movement
5. Actuator
6. Actuator Arm
7. Platters
8. Protective Cover
9. Chassis
10. Firmware Examination
11. Image Repair Drive

• Level 1 - Logical: No physical damage, Logical minor file system corruption as a result of a possible windows update, user error or possible virus.
• Level 2 - Mechanical/Logical: Disk with up to 1% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 3 - Mechanical/Logical: Disk with up to 5% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 4 - Mechanical/Logical: Disk with up to 10% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without bad sectors but with a massive logical corruption of the file system and possibly overwritten data, etc.
• Level 5 - Firmware/Mechanical/Electronic: Disk with corrupted firmware modules and with at least 1% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without physical damage but with disk encryption applied and underlying file system corruption. This level also covers electronic faults of the board PCB.
• Level 6 - Physical/Mechanical/Firmware: clean room job for physically damaged drive with either R/W heads stiction condition, or with at least one faulty R/W in the stack. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 7 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp without obvious magnetic platters damage. These jobs will be defined as recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 8 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp with obvious magnetic platters damage. These jobs will be defined as top complexity recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not – the success rate in these type of cases will be lower because of the magnetic platters damage. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption. In some of the cases only partial recovery may be possible.
• Not Recoverable: drives with excessive magnetic platters damage – usually carved rings and highly contaminated drive chamber as a result of the carved black particles. With current technology these type of jobs are beyond recovery.

The hard drive recovery process is very complex and requires a lot of specialized data recovery engineering tools and knowledge, and level 6+ failures require a class 100 cleanroom.

At COLETEK, we're proud to be a multidisciplinary Australian engineering and product development company established in 2001. With over two decades of experience under our belt, we've built a reputation as trusted partners for businesses across East Lynne, New South Wales, Australia and throughout the country. Our team of experts is dedicated to delivering reliability, collaboration, and capability to our clients. As a long-standing presence in Australian industry, we're well-equipped to support businesses in East Lynne, New South Wales, Australia who are looking for innovative solutions to their engineering challenges. Whether you're seeking to develop new products, improve existing processes, or address specific technical requirements, our experts will work closely with your team to understand your needs and deliver tailored results. Our unique blend of engineering expertise, product development capabilities, and national presence makes us an ideal partner for businesses operating in East Lynne, New South Wales, Australia. We're committed to serving the local community and helping businesses navigate the complexities of Australian industry. At COLETEK, we believe that long-term relationships are built on trust, open communication, and a deep understanding of our clients' needs. Our team is passionate about delivering exceptional outcomes that meet our clients' goals, whether they're located in East Lynne, New South Wales, Australia or anywhere else across the country. If you're looking for engineering solutions that can help take your business to the next level, we invite you to explore how COLETEK can support your operations. Whether you're seeking guidance on a specific project or simply want to learn more about our capabilities, we're here to help.