Data Recovery & Backup Solutions for Corunna

If you heard your hard drive making a ticking noise, you have a hardware issue (disconnect your hard drive right away), which is costly to fix - but in most cases we can recovery your data.

1. IC Logic Board PCB
2. Motor/Spindle
3. Physical Heads
4. Heads Movement
5. Actuator
6. Actuator Arm
7. Platters
8. Protective Cover
9. Chassis
10. Firmware Examination
11. Image Repair Drive

• Level 1 - Logical: No physical damage, Logical minor file system corruption as a result of a possible windows update, user error or possible virus.
• Level 2 - Mechanical/Logical: Disk with up to 1% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 3 - Mechanical/Logical: Disk with up to 5% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 4 - Mechanical/Logical: Disk with up to 10% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without bad sectors but with a massive logical corruption of the file system and possibly overwritten data, etc.
• Level 5 - Firmware/Mechanical/Electronic: Disk with corrupted firmware modules and with at least 1% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without physical damage but with disk encryption applied and underlying file system corruption. This level also covers electronic faults of the board PCB.
• Level 6 - Physical/Mechanical/Firmware: clean room job for physically damaged drive with either R/W heads stiction condition, or with at least one faulty R/W in the stack. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 7 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp without obvious magnetic platters damage. These jobs will be defined as recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 8 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp with obvious magnetic platters damage. These jobs will be defined as top complexity recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not – the success rate in these type of cases will be lower because of the magnetic platters damage. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption. In some of the cases only partial recovery may be possible.
• Not Recoverable: drives with excessive magnetic platters damage – usually carved rings and highly contaminated drive chamber as a result of the carved black particles. With current technology these type of jobs are beyond recovery.

The hard drive recovery process is very complex and requires a lot of specialized data recovery engineering tools and knowledge, and level 6+ failures require a class 100 cleanroom.

As a business owner in Corunna, New South Wales, Australia, you understand the importance of partnering with a trusted and experienced partner to drive innovation and growth. For over two decades, COLETEK has been serving businesses across Corunna, New South Wales, Australia, providing top-notch engineering and product development solutions that help companies like yours thrive. Our multidisciplinary Australian engineering and product development company, established in 2001, is built on a foundation of exceptional capability, collaborative spirit, and unwavering commitment to reliability. We are proud to be based in Corunna, New South Wales, Australia, and enjoy an envied reputation as a trusted national player in the industry. By partnering with COLETEK, businesses throughout Corunna, New South Wales, Australia can benefit from our expertise in delivering bespoke solutions that address their unique needs. Our team of talented engineers and product development professionals will work closely with you to understand your challenges and aspirations, then apply their knowledge and skills to develop tailored strategies for achieving success. We don't just talk about innovation - we actually deliver it. Whether you're looking to improve existing processes, reduce costs, or create new opportunities, our expertise in engineering and product development can help you overcome the complex challenges facing Corunna, New South Wales, Australia businesses today. At COLETEK, we're passionate about building long-term relationships with clients based in Corunna, New South Wales, Australia. We understand that every business is unique, with its own set of strengths, weaknesses, and aspirations. That's why we take the time to get to know you and your organization, tailoring our approach to support your distinct needs. If you're ready to unlock the potential of your Corunna, New South Wales, Australia business through innovative engineering and product development solutions, we'd love to start a conversation with you. Let's build something remarkable together.