Data Recovery & Backup Solutions for Bukalong

If you heard your hard drive making a ticking noise, you have a hardware issue (disconnect your hard drive right away), which is costly to fix - but in most cases we can recovery your data.

1. IC Logic Board PCB
2. Motor/Spindle
3. Physical Heads
4. Heads Movement
5. Actuator
6. Actuator Arm
7. Platters
8. Protective Cover
9. Chassis
10. Firmware Examination
11. Image Repair Drive

• Level 1 - Logical: No physical damage, Logical minor file system corruption as a result of a possible windows update, user error or possible virus.
• Level 2 - Mechanical/Logical: Disk with up to 1% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 3 - Mechanical/Logical: Disk with up to 5% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 4 - Mechanical/Logical: Disk with up to 10% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without bad sectors but with a massive logical corruption of the file system and possibly overwritten data, etc.
• Level 5 - Firmware/Mechanical/Electronic: Disk with corrupted firmware modules and with at least 1% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without physical damage but with disk encryption applied and underlying file system corruption. This level also covers electronic faults of the board PCB.
• Level 6 - Physical/Mechanical/Firmware: clean room job for physically damaged drive with either R/W heads stiction condition, or with at least one faulty R/W in the stack. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 7 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp without obvious magnetic platters damage. These jobs will be defined as recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 8 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp with obvious magnetic platters damage. These jobs will be defined as top complexity recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not – the success rate in these type of cases will be lower because of the magnetic platters damage. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption. In some of the cases only partial recovery may be possible.
• Not Recoverable: drives with excessive magnetic platters damage – usually carved rings and highly contaminated drive chamber as a result of the carved black particles. With current technology these type of jobs are beyond recovery.

The hard drive recovery process is very complex and requires a lot of specialized data recovery engineering tools and knowledge, and level 6+ failures require a class 100 cleanroom.

At COLETEK, we're proud to operate throughout Australia, including the diverse region of Bukalong, New South Wales. As a multidisciplinary engineering and product development company established in 2001, our team has been serving businesses across Bukalong, New South Wales, Australia for nearly two decades. Our commitment to innovation, collaboration, and reliability has earned us a trusted national reputation as a capability-rich partner for local business owners and technical decision-makers. By leveraging our expertise in engineering and product development, we empower companies across various sectors to overcome design, manufacturing, and operational challenges. Based in Bukalong, New South Wales, Australia, COLETEK takes pride in fostering strong, long-term relationships with businesses and organizations within the region. Our deep understanding of local needs, trends, and regulations enables us to provide tailored solutions that address the unique requirements of companies operating in this dynamic environment. As a reliable and capable partner, we're dedicated to supporting local businesses across Bukalong, New South Wales, Australia, as well as other regions throughout Australia. By combining our technical acumen with your industry expertise, we create innovative products, processes, and solutions that drive growth, improve efficiency, and enhance competitiveness. At COLETEK, we're driven by a passion for engineering and product development excellence. With our strong foundation in these areas, we're well-positioned to support the diverse range of businesses operating in Bukalong, New South Wales, Australia, from manufacturing and logistics to services and technology.