Data Recovery & Backup Solutions for Brogo

If you heard your hard drive making a ticking noise, you have a hardware issue (disconnect your hard drive right away), which is costly to fix - but in most cases we can recovery your data.

1. IC Logic Board PCB
2. Motor/Spindle
3. Physical Heads
4. Heads Movement
5. Actuator
6. Actuator Arm
7. Platters
8. Protective Cover
9. Chassis
10. Firmware Examination
11. Image Repair Drive

• Level 1 - Logical: No physical damage, Logical minor file system corruption as a result of a possible windows update, user error or possible virus.
• Level 2 - Mechanical/Logical: Disk with up to 1% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 3 - Mechanical/Logical: Disk with up to 5% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 4 - Mechanical/Logical: Disk with up to 10% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without bad sectors but with a massive logical corruption of the file system and possibly overwritten data, etc.
• Level 5 - Firmware/Mechanical/Electronic: Disk with corrupted firmware modules and with at least 1% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without physical damage but with disk encryption applied and underlying file system corruption. This level also covers electronic faults of the board PCB.
• Level 6 - Physical/Mechanical/Firmware: clean room job for physically damaged drive with either R/W heads stiction condition, or with at least one faulty R/W in the stack. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 7 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp without obvious magnetic platters damage. These jobs will be defined as recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 8 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp with obvious magnetic platters damage. These jobs will be defined as top complexity recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not – the success rate in these type of cases will be lower because of the magnetic platters damage. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption. In some of the cases only partial recovery may be possible.
• Not Recoverable: drives with excessive magnetic platters damage – usually carved rings and highly contaminated drive chamber as a result of the carved black particles. With current technology these type of jobs are beyond recovery.

The hard drive recovery process is very complex and requires a lot of specialized data recovery engineering tools and knowledge, and level 6+ failures require a class 100 cleanroom.

For over two decades, COLETEK has been a trusted partner for businesses across Brogo, New South Wales, Australia and throughout the country. As a multidisciplinary Australian engineering and product development company established in 2001, we have built a reputation for delivering innovative solutions that meet our clients' needs. Our team of experts is dedicated to collaborating with local businesses in Brogo, New South Wales, Australia to help them overcome challenges and achieve their goals. We take pride in being a reliable partner, always available to offer guidance and support throughout the entire development process. Whether you're looking to improve operational efficiency, enhance customer experience, or simply stay ahead of the competition, we are here to provide expertise and capability that addresses your specific requirements. As a company with a national presence operating throughout Australia, including Brogo, New South Wales, Australia, we have a deep understanding of local market conditions and industry dynamics. This allows us to develop tailored solutions that not only meet but exceed our clients' expectations. By leveraging our collective expertise and experience in engineering and product development, we empower businesses like yours to succeed and grow. At COLETEK, we are driven by a passion for innovation and a commitment to delivering exceptional results. We believe that partnering with local businesses in Brogo, New South Wales, Australia is not just about providing technical solutions – it's about building long-term relationships and contributing to the overall growth and prosperity of the community. That's why we're dedicated to helping our clients achieve their objectives by leveraging our multidisciplinary expertise, including engineering and product development. If you're looking for a reliable partner to help your business thrive in Brogo, New South Wales, Australia, contact COLETEK today. We are excited to collaborate with local businesses like yours and help you achieve remarkable results.