Data Recovery & Backup Solutions for Berlang

If you heard your hard drive making a ticking noise, you have a hardware issue (disconnect your hard drive right away), which is costly to fix - but in most cases we can recovery your data.

1. IC Logic Board PCB
2. Motor/Spindle
3. Physical Heads
4. Heads Movement
5. Actuator
6. Actuator Arm
7. Platters
8. Protective Cover
9. Chassis
10. Firmware Examination
11. Image Repair Drive

• Level 1 - Logical: No physical damage, Logical minor file system corruption as a result of a possible windows update, user error or possible virus.
• Level 2 - Mechanical/Logical: Disk with up to 1% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 3 - Mechanical/Logical: Disk with up to 5% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 4 - Mechanical/Logical: Disk with up to 10% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without bad sectors but with a massive logical corruption of the file system and possibly overwritten data, etc.
• Level 5 - Firmware/Mechanical/Electronic: Disk with corrupted firmware modules and with at least 1% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without physical damage but with disk encryption applied and underlying file system corruption. This level also covers electronic faults of the board PCB.
• Level 6 - Physical/Mechanical/Firmware: clean room job for physically damaged drive with either R/W heads stiction condition, or with at least one faulty R/W in the stack. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 7 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp without obvious magnetic platters damage. These jobs will be defined as recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 8 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp with obvious magnetic platters damage. These jobs will be defined as top complexity recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not – the success rate in these type of cases will be lower because of the magnetic platters damage. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption. In some of the cases only partial recovery may be possible.
• Not Recoverable: drives with excessive magnetic platters damage – usually carved rings and highly contaminated drive chamber as a result of the carved black particles. With current technology these type of jobs are beyond recovery.

The hard drive recovery process is very complex and requires a lot of specialized data recovery engineering tools and knowledge, and level 6+ failures require a class 100 cleanroom.

As a trusted and innovative multidisciplinary engineering and product development company, COLETEK is proud to serve the thriving businesses in Berlang, New South Wales, Australia. With over two decades of experience since our inception in 2001, we've built an impressive national reputation for reliability, collaboration, and capability. Located in Berlang, New South Wales, Australia, COLETEK operates throughout this beautiful region and beyond, delivering innovative solutions that drive results for our clients. Our expert teams possess a deep understanding of the unique challenges faced by businesses in Berlang, New South Wales, Australia, and we're dedicated to helping them overcome these hurdles. At COLETEK, we're passionate about empowering local businesses to succeed through expert engineering and product development services. From conceptualization to delivery, our collaborative approach ensures that our clients' needs are met with creative, practical solutions tailored to their specific goals and objectives. Our multidisciplinary expertise enables us to tackle complex projects across various industries, ensuring that our clients receive comprehensive support for their operations. As a trusted partner for businesses in Berlang, New South Wales, Australia, COLETEK is committed to fostering long-term relationships built on trust, open communication, and mutual respect. We understand the importance of preserving local character while embracing innovation, which is why we're dedicated to serving this community with the same passion and dedication as we would any other. For businesses in Berlang, New South Wales, Australia looking for engineering and product development expertise that truly understands their needs, look no further than COLETEK. Our team's extensive experience, innovative capabilities, and trusted reputation make us the perfect partner to help you achieve your goals. Let's build something remarkable together!