Data Recovery & Backup Solutions for Batemans Bay

If you heard your hard drive making a ticking noise, you have a hardware issue (disconnect your hard drive right away), which is costly to fix - but in most cases we can recovery your data.

1. IC Logic Board PCB
2. Motor/Spindle
3. Physical Heads
4. Heads Movement
5. Actuator
6. Actuator Arm
7. Platters
8. Protective Cover
9. Chassis
10. Firmware Examination
11. Image Repair Drive

• Level 1 - Logical: No physical damage, Logical minor file system corruption as a result of a possible windows update, user error or possible virus.
• Level 2 - Mechanical/Logical: Disk with up to 1% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 3 - Mechanical/Logical: Disk with up to 5% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 4 - Mechanical/Logical: Disk with up to 10% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without bad sectors but with a massive logical corruption of the file system and possibly overwritten data, etc.
• Level 5 - Firmware/Mechanical/Electronic: Disk with corrupted firmware modules and with at least 1% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without physical damage but with disk encryption applied and underlying file system corruption. This level also covers electronic faults of the board PCB.
• Level 6 - Physical/Mechanical/Firmware: clean room job for physically damaged drive with either R/W heads stiction condition, or with at least one faulty R/W in the stack. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 7 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp without obvious magnetic platters damage. These jobs will be defined as recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 8 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp with obvious magnetic platters damage. These jobs will be defined as top complexity recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not – the success rate in these type of cases will be lower because of the magnetic platters damage. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption. In some of the cases only partial recovery may be possible.
• Not Recoverable: drives with excessive magnetic platters damage – usually carved rings and highly contaminated drive chamber as a result of the carved black particles. With current technology these type of jobs are beyond recovery.

The hard drive recovery process is very complex and requires a lot of specialized data recovery engineering tools and knowledge, and level 6+ failures require a class 100 cleanroom.

As a business owner or technical decision-maker in Batemans Bay, New South Wales, Australia, you understand the importance of partnering with an innovative and reliable engineering partner to drive your organization's success. Established in 2001 as a multidisciplinary Australian engineering and product development company, COLETEK has built a reputation for delivering exceptional outcomes that meet the unique needs of businesses across Batemans Bay, New South Wales, Australia. With our headquarters based in Batemans Bay, New South Wales, Australia, we are strategically positioned to support local businesses like yours. Our dedicated team is committed to providing tailored solutions that cater to the specific requirements of industries operating throughout Batemans Bay, New South Wales, Australia. By leveraging our cutting-edge technology and engineering expertise, you can rest assured that your projects will be executed with precision, reliability, and a keen eye for detail. At COLETEK, we pride ourselves on being more than just an engineering partner – we're a trusted collaborative ally dedicated to understanding the needs of our clients. Our experienced team is passionate about designing and developing innovative solutions that meet the unique challenges faced by businesses in Batemans Bay, New South Wales, Australia. Through our collaborative approach, we empower our partners to achieve their goals while providing them with the peace of mind that comes from knowing their project is in capable hands. When you choose COLETEK as your engineering and product development partner in Batemans Bay, New South Wales, Australia, you can rely on us to bring a level of expertise, integrity, and commitment to every project. Our team is dedicated to delivering exceptional results that exceed your expectations, whether you're looking to launch a new product, optimize an existing process, or address a complex engineering challenge. At COLETEK, we're proud to serve businesses across Batemans Bay, New South Wales, Australia, operating throughout the region with professionalism and distinction. Join forces with us today to unlock the full potential of your organization and let's build something remarkable together!