Data Recovery & Backup Solutions for Bald Hills

If you heard your hard drive making a ticking noise, you have a hardware issue (disconnect your hard drive right away), which is costly to fix - but in most cases we can recovery your data.

1. IC Logic Board PCB
2. Motor/Spindle
3. Physical Heads
4. Heads Movement
5. Actuator
6. Actuator Arm
7. Platters
8. Protective Cover
9. Chassis
10. Firmware Examination
11. Image Repair Drive

• Level 1 - Logical: No physical damage, Logical minor file system corruption as a result of a possible windows update, user error or possible virus.
• Level 2 - Mechanical/Logical: Disk with up to 1% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 3 - Mechanical/Logical: Disk with up to 5% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 4 - Mechanical/Logical: Disk with up to 10% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without bad sectors but with a massive logical corruption of the file system and possibly overwritten data, etc.
• Level 5 - Firmware/Mechanical/Electronic: Disk with corrupted firmware modules and with at least 1% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without physical damage but with disk encryption applied and underlying file system corruption. This level also covers electronic faults of the board PCB.
• Level 6 - Physical/Mechanical/Firmware: clean room job for physically damaged drive with either R/W heads stiction condition, or with at least one faulty R/W in the stack. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 7 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp without obvious magnetic platters damage. These jobs will be defined as recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 8 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp with obvious magnetic platters damage. These jobs will be defined as top complexity recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not – the success rate in these type of cases will be lower because of the magnetic platters damage. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption. In some of the cases only partial recovery may be possible.
• Not Recoverable: drives with excessive magnetic platters damage – usually carved rings and highly contaminated drive chamber as a result of the carved black particles. With current technology these type of jobs are beyond recovery.

The hard drive recovery process is very complex and requires a lot of specialized data recovery engineering tools and knowledge, and level 6+ failures require a class 100 cleanroom.

Based in Bald Hills, New South Wales, Australia, COLETEK is a multidisciplinary Australian engineering and product development company established in 2001. With over two decades of experience, we've built a reputation as a trusted partner for businesses across the nation. From our roots in Bald Hills to our capabilities operating throughout Australia, we're committed to providing exceptional solutions that drive real results. As a business owner or decision-maker in Bald Hills, New South Wales, Australia, you know the importance of reliability and collaboration. At COLETEK, we understand the unique challenges faced by local businesses and strive to deliver innovative engineering and product development services that meet their needs. Our team combines technical expertise with industry knowledge, ensuring that our clients receive tailored solutions that cater to their goals. Our national reputation is built on a foundation of trust, integrity, and a passion for engineering excellence. We take pride in our ability to work closely with businesses across Bald Hills, New South Wales, Australia, understanding their distinct needs and challenges. Whether you're looking to improve operations, enhance product performance, or drive innovation, we'll work together to find the best solution. When it comes to addressing your engineering and product development needs, you deserve a partner that can deliver reliable results. That's where COLETEK excels – with our multidisciplinary approach, we address complex challenges head-on, leveraging our vast experience in Bald Hills, New South Wales, Australia, and beyond. Our capability is backed by a strong reputation for reliability, ensuring your project receives the attention it deserves. As you navigate the ever-evolving landscape of Australian engineering and product development, it's essential to partner with an organization that's committed to your success. COLETEK has consistently demonstrated its capacity to support businesses in Bald Hills, New South Wales, Australia, providing trusted engineering expertise across various industries. When you work with us, you can rest assured that your project is in good hands.