Data Recovery & Backup Solutions for Moonbria

If you heard your hard drive making a ticking noise, you have a hardware issue (disconnect your hard drive right away), which is costly to fix - but in most cases we can recovery your data.

1. IC Logic Board PCB
2. Motor/Spindle
3. Physical Heads
4. Heads Movement
5. Actuator
6. Actuator Arm
7. Platters
8. Protective Cover
9. Chassis
10. Firmware Examination
11. Image Repair Drive

• Level 1 - Logical: No physical damage, Logical minor file system corruption as a result of a possible windows update, user error or possible virus.
• Level 2 - Mechanical/Logical: Disk with up to 1% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 3 - Mechanical/Logical: Disk with up to 5% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 4 - Mechanical/Logical: Disk with up to 10% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without bad sectors but with a massive logical corruption of the file system and possibly overwritten data, etc.
• Level 5 - Firmware/Mechanical/Electronic: Disk with corrupted firmware modules and with at least 1% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without physical damage but with disk encryption applied and underlying file system corruption. This level also covers electronic faults of the board PCB.
• Level 6 - Physical/Mechanical/Firmware: clean room job for physically damaged drive with either R/W heads stiction condition, or with at least one faulty R/W in the stack. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 7 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp without obvious magnetic platters damage. These jobs will be defined as recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 8 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp with obvious magnetic platters damage. These jobs will be defined as top complexity recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not – the success rate in these type of cases will be lower because of the magnetic platters damage. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption. In some of the cases only partial recovery may be possible.
• Not Recoverable: drives with excessive magnetic platters damage – usually carved rings and highly contaminated drive chamber as a result of the carved black particles. With current technology these type of jobs are beyond recovery.

The hard drive recovery process is very complex and requires a lot of specialized data recovery engineering tools and knowledge, and level 6+ failures require a class 100 cleanroom.

At COLETEK, we've been dedicated to supporting local businesses in Moonbria, New South Wales, Australia since 2001. Our multidisciplinary team of engineers and product developers has earned a trusted reputation across the country for our innovative approach to problem-solving. As a company that operates throughout Australia, including Moonbria, New South Wales, we understand the unique challenges faced by businesses in this region. With such a strong local focus, it's essential to have a reliable partner that can provide tailored solutions and expertise to drive growth and innovation. COLETEK has built its reputation on providing exceptional engineering and product development capabilities to businesses across Moonbria, New South Wales, Australia. Leveraging our collective expertise, we've collaborated with numerous clients in the region to deliver successful projects that meet their needs. From concept design through to prototype development and testing, our team is equipped to handle a wide range of challenges. Our approach is centered around collaboration, reliability, and capability – three values that are deeply entrenched in our company culture. By working closely with our partners, we develop deep understanding of the specific needs of each business, allowing us to provide bespoke solutions that drive real results. When you partner with COLETEK based in Moonbria, New South Wales, Australia, you can trust that our team will bring a wealth of knowledge and experience to your project. We're committed to delivering exceptional outcomes that meet the unique needs of businesses throughout this region. Let us leverage our expertise to help you build something truly remarkable.