Data Recovery & Backup Solutions for Boree Creek

If you heard your hard drive making a ticking noise, you have a hardware issue (disconnect your hard drive right away), which is costly to fix - but in most cases we can recovery your data.

1. IC Logic Board PCB
2. Motor/Spindle
3. Physical Heads
4. Heads Movement
5. Actuator
6. Actuator Arm
7. Platters
8. Protective Cover
9. Chassis
10. Firmware Examination
11. Image Repair Drive

• Level 1 - Logical: No physical damage, Logical minor file system corruption as a result of a possible windows update, user error or possible virus.
• Level 2 - Mechanical/Logical: Disk with up to 1% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 3 - Mechanical/Logical: Disk with up to 5% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 4 - Mechanical/Logical: Disk with up to 10% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without bad sectors but with a massive logical corruption of the file system and possibly overwritten data, etc.
• Level 5 - Firmware/Mechanical/Electronic: Disk with corrupted firmware modules and with at least 1% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without physical damage but with disk encryption applied and underlying file system corruption. This level also covers electronic faults of the board PCB.
• Level 6 - Physical/Mechanical/Firmware: clean room job for physically damaged drive with either R/W heads stiction condition, or with at least one faulty R/W in the stack. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 7 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp without obvious magnetic platters damage. These jobs will be defined as recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 8 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp with obvious magnetic platters damage. These jobs will be defined as top complexity recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not – the success rate in these type of cases will be lower because of the magnetic platters damage. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption. In some of the cases only partial recovery may be possible.
• Not Recoverable: drives with excessive magnetic platters damage – usually carved rings and highly contaminated drive chamber as a result of the carved black particles. With current technology these type of jobs are beyond recovery.

The hard drive recovery process is very complex and requires a lot of specialized data recovery engineering tools and knowledge, and level 6+ failures require a class 100 cleanroom.

As the sun rises over the rolling hills of Boree Creek, New South Wales, Australia, you know that you're part of a community that values integrity, reliability, and innovation. At COLETEK, we share those same values and are proud to serve businesses across Boree Creek, New South Wales, Australia with our multidisciplinary engineering and product development expertise. With over two decades of experience as a trusted national reputation, we've earned a reputation for delivering game-changing outcomes through collaborative partnerships. Our company was established in 2001 with the vision of empowering Australian businesses to succeed by providing top-notch engineering solutions that meet their unique needs. Today, we're proud to operate throughout Australia, including Boree Creek, New South Wales, Australia, where our expertise can make a tangible difference. At COLETEK, we understand that every business is distinct, with its own set of challenges and goals. That's why we take the time to listen and learn about your enterprise, identifying specific pain points and opportunities for growth. We then apply our collective knowledge and capabilities to develop tailored engineering solutions that drive real results. By working closely with you, we can help overcome obstacles, seize new market opportunities, and ultimately propel your business forward. As you navigate the ever-changing landscape of Boree Creek, New South Wales, Australia's economy, it's reassuring to know that COLETEK is a trusted ally in the community, committed to providing dependable assistance and expert guidance. We're not just another faceless corporation; we're a values-driven firm dedicated to building long-term relationships with our clients. When you partner with COLETEK, you can rely on our expertise in engineering and product development to provide sustainable solutions that meet your unique needs. Whether you're looking to launch a new product, optimize processes, or drive innovation, our team of experts is here to support your ambitions. And as a business operating throughout Boree Creek, New South Wales, Australia, we have a deep understanding of the region's unique characteristics and challenges. So why settle for less when working with COLETEK – serving businesses across Boree Creek, New South Wales, Australia - means you'll get the best of both worlds: an engineering company that understands your local market and has a national reputation for delivering exceptional results. Join forces with us and discover how our collaborative approach can help you achieve remarkable things.