Data Recovery & Backup Solutions for Wallangra

If you heard your hard drive making a ticking noise, you have a hardware issue (disconnect your hard drive right away), which is costly to fix - but in most cases we can recovery your data.

1. IC Logic Board PCB
2. Motor/Spindle
3. Physical Heads
4. Heads Movement
5. Actuator
6. Actuator Arm
7. Platters
8. Protective Cover
9. Chassis
10. Firmware Examination
11. Image Repair Drive

• Level 1 - Logical: No physical damage, Logical minor file system corruption as a result of a possible windows update, user error or possible virus.
• Level 2 - Mechanical/Logical: Disk with up to 1% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 3 - Mechanical/Logical: Disk with up to 5% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 4 - Mechanical/Logical: Disk with up to 10% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without bad sectors but with a massive logical corruption of the file system and possibly overwritten data, etc.
• Level 5 - Firmware/Mechanical/Electronic: Disk with corrupted firmware modules and with at least 1% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without physical damage but with disk encryption applied and underlying file system corruption. This level also covers electronic faults of the board PCB.
• Level 6 - Physical/Mechanical/Firmware: clean room job for physically damaged drive with either R/W heads stiction condition, or with at least one faulty R/W in the stack. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 7 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp without obvious magnetic platters damage. These jobs will be defined as recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 8 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp with obvious magnetic platters damage. These jobs will be defined as top complexity recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not – the success rate in these type of cases will be lower because of the magnetic platters damage. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption. In some of the cases only partial recovery may be possible.
• Not Recoverable: drives with excessive magnetic platters damage – usually carved rings and highly contaminated drive chamber as a result of the carved black particles. With current technology these type of jobs are beyond recovery.

The hard drive recovery process is very complex and requires a lot of specialized data recovery engineering tools and knowledge, and level 6+ failures require a class 100 cleanroom.

As you navigate the rich agricultural landscape of Wallangra, New South Wales, Australia, it is crucial to find a trusted partner that has your business needs covered. For over two decades, COLETEK has proudly served as a multidisciplinary Australian engineering and product development company, established in 2001, with a reputation that transcends borders. Our team of seasoned experts operates throughout the country, including Wallangra, New South Wales, Australia, working closely with local businesses to help them overcome complex challenges and achieve their growth ambitions. With an unwavering commitment to innovation, reliability, and collaboration, we have earned a trusted national reputation as a go-to partner for engineered solutions that drive results. At COLETEK, we take pride in our ability to serve businesses across Wallangra, New South Wales, Australia, with products and services tailored to meet their unique needs. By leveraging our expertise in engineering and product development, we empower local business leaders like you to make informed decisions, increase efficiency, and stay ahead of the curve. Throughout our years of operation, we have developed a deep understanding of the complexities that come with building and maintaining innovative products. Our team's exceptional skillset and experience allow us to effectively communicate with clients from Wallangra, New South Wales, Australia, providing them with the confidence and expertise needed to succeed in an ever-evolving marketplace. As you evaluate potential partners for your business in Wallangra, New South Wales, Australia, it is essential to consider a company that not only understands your industry but also shares your commitment to innovation. At COLETEK, we share your passion for growth and are dedicated to empowering local businesses like yours to achieve their full potential.