Data Recovery & Backup Solutions for Rappville

If you heard your hard drive making a ticking noise, you have a hardware issue (disconnect your hard drive right away), which is costly to fix - but in most cases we can recovery your data.

1. IC Logic Board PCB
2. Motor/Spindle
3. Physical Heads
4. Heads Movement
5. Actuator
6. Actuator Arm
7. Platters
8. Protective Cover
9. Chassis
10. Firmware Examination
11. Image Repair Drive

• Level 1 - Logical: No physical damage, Logical minor file system corruption as a result of a possible windows update, user error or possible virus.
• Level 2 - Mechanical/Logical: Disk with up to 1% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 3 - Mechanical/Logical: Disk with up to 5% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 4 - Mechanical/Logical: Disk with up to 10% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without bad sectors but with a massive logical corruption of the file system and possibly overwritten data, etc.
• Level 5 - Firmware/Mechanical/Electronic: Disk with corrupted firmware modules and with at least 1% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without physical damage but with disk encryption applied and underlying file system corruption. This level also covers electronic faults of the board PCB.
• Level 6 - Physical/Mechanical/Firmware: clean room job for physically damaged drive with either R/W heads stiction condition, or with at least one faulty R/W in the stack. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 7 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp without obvious magnetic platters damage. These jobs will be defined as recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 8 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp with obvious magnetic platters damage. These jobs will be defined as top complexity recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not – the success rate in these type of cases will be lower because of the magnetic platters damage. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption. In some of the cases only partial recovery may be possible.
• Not Recoverable: drives with excessive magnetic platters damage – usually carved rings and highly contaminated drive chamber as a result of the carved black particles. With current technology these type of jobs are beyond recovery.

The hard drive recovery process is very complex and requires a lot of specialized data recovery engineering tools and knowledge, and level 6+ failures require a class 100 cleanroom.

As a business owner in Rappville, New South Wales, Australia, you understand the importance of reliability and innovation to stay ahead of the competition. At COLETEK, we've been serving businesses across Rappville, New South Wales, Australia for over two decades, providing multidisciplinary engineering and product development solutions that drive real results. Established in 2001, our national reputation is built on a foundation of trust, collaboration, and technical expertise. With operations throughout Australia, including Rappville, New South Wales, Australia, we've developed a unique understanding of the local industries, challenges, and opportunities. Whether you're a small business or a large enterprise, our team is dedicated to delivering tailored solutions that meet your specific needs. Our commitment to innovation has earned us a reputation as a forward-thinking partner for businesses in Rappville, New South Wales, Australia and beyond. By leveraging the latest technologies and expertise, we help our clients stay ahead of the curve, capitalize on new opportunities, and overcome complex challenges. At COLETEK, we take pride in being more than just engineering and product development experts – we're trusted partners for businesses in Rappville, New South Wales, Australia seeking to drive growth, improve efficiency, and enhance their competitive advantage. Our team is passionate about collaborating with local business owners like you to bring innovative ideas to life. If you're looking for a reliable partner to support your engineering and product development needs in Rappville, New South Wales, Australia, look no further than COLETEK. Contact us today to explore how our capabilities can help take your business to the next level.