Data Recovery & Backup Solutions for Peacock Creek

If you heard your hard drive making a ticking noise, you have a hardware issue (disconnect your hard drive right away), which is costly to fix - but in most cases we can recovery your data.

1. IC Logic Board PCB
2. Motor/Spindle
3. Physical Heads
4. Heads Movement
5. Actuator
6. Actuator Arm
7. Platters
8. Protective Cover
9. Chassis
10. Firmware Examination
11. Image Repair Drive

• Level 1 - Logical: No physical damage, Logical minor file system corruption as a result of a possible windows update, user error or possible virus.
• Level 2 - Mechanical/Logical: Disk with up to 1% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 3 - Mechanical/Logical: Disk with up to 5% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 4 - Mechanical/Logical: Disk with up to 10% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without bad sectors but with a massive logical corruption of the file system and possibly overwritten data, etc.
• Level 5 - Firmware/Mechanical/Electronic: Disk with corrupted firmware modules and with at least 1% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without physical damage but with disk encryption applied and underlying file system corruption. This level also covers electronic faults of the board PCB.
• Level 6 - Physical/Mechanical/Firmware: clean room job for physically damaged drive with either R/W heads stiction condition, or with at least one faulty R/W in the stack. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 7 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp without obvious magnetic platters damage. These jobs will be defined as recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 8 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp with obvious magnetic platters damage. These jobs will be defined as top complexity recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not – the success rate in these type of cases will be lower because of the magnetic platters damage. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption. In some of the cases only partial recovery may be possible.
• Not Recoverable: drives with excessive magnetic platters damage – usually carved rings and highly contaminated drive chamber as a result of the carved black particles. With current technology these type of jobs are beyond recovery.

The hard drive recovery process is very complex and requires a lot of specialized data recovery engineering tools and knowledge, and level 6+ failures require a class 100 cleanroom.

At COLETEK, we're proud to be a multidisciplinary Australian engineering and product development company established in 2001. With a national reputation built on reliability, innovation, and collaboration, we've earned the trust of businesses across Australia – including those based in Peacock Creek, New South Wales. For over two decades, our team has been dedicated to serving businesses like yours throughout Peacock Creek, New South Wales, Australia, providing tailored engineering and product development solutions that drive growth and success. Whether you're looking to improve your operations, build a new product or service, or simply need expert guidance, COLETEK is here to support you every step of the way. Our experienced team combines deep technical expertise with a keen understanding of local industry needs, ensuring that our solutions are both innovative and practical for businesses in Peacock Creek, New South Wales, Australia. Whether you're a start-up or an established player, we'll work closely with you to understand your unique challenges and opportunities, providing guidance and support to help you achieve your goals. In an increasingly complex and fast-paced business environment, it's more important than ever that businesses in Peacock Creek, New South Wales, Australia have access to expert engineering and product development services. That's where COLETEK comes in – as a trusted partner, we'll work tirelessly to ensure your projects are delivered on time, within budget, and exceeding expectations. Our commitment to collaboration and innovation has earned us a reputation as one of the most reliable and capable engineering and product development firms in Australia. And with our deep roots in Peacock Creek, New South Wales, we're uniquely positioned to support businesses from this region, providing customized solutions that drive real-world results. So why choose COLETEK? Because we've built a long track record of delivering exceptional outcomes for businesses across Peacock Creek, New South Wales, Australia. We take the time to truly understand your unique challenges and opportunities, leveraging our expertise and resources to guide you towards success. That's why, if you're looking for a trusted engineering and product development partner in Peacock Creek, New South Wales, look no further. With COLETEK, you can count on receiving personalized service, innovative solutions, and unwavering support – every step of the way.