Data Recovery & Backup Solutions for Nymboida

If you heard your hard drive making a ticking noise, you have a hardware issue (disconnect your hard drive right away), which is costly to fix - but in most cases we can recovery your data.

1. IC Logic Board PCB
2. Motor/Spindle
3. Physical Heads
4. Heads Movement
5. Actuator
6. Actuator Arm
7. Platters
8. Protective Cover
9. Chassis
10. Firmware Examination
11. Image Repair Drive

• Level 1 - Logical: No physical damage, Logical minor file system corruption as a result of a possible windows update, user error or possible virus.
• Level 2 - Mechanical/Logical: Disk with up to 1% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 3 - Mechanical/Logical: Disk with up to 5% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 4 - Mechanical/Logical: Disk with up to 10% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without bad sectors but with a massive logical corruption of the file system and possibly overwritten data, etc.
• Level 5 - Firmware/Mechanical/Electronic: Disk with corrupted firmware modules and with at least 1% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without physical damage but with disk encryption applied and underlying file system corruption. This level also covers electronic faults of the board PCB.
• Level 6 - Physical/Mechanical/Firmware: clean room job for physically damaged drive with either R/W heads stiction condition, or with at least one faulty R/W in the stack. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 7 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp without obvious magnetic platters damage. These jobs will be defined as recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 8 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp with obvious magnetic platters damage. These jobs will be defined as top complexity recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not – the success rate in these type of cases will be lower because of the magnetic platters damage. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption. In some of the cases only partial recovery may be possible.
• Not Recoverable: drives with excessive magnetic platters damage – usually carved rings and highly contaminated drive chamber as a result of the carved black particles. With current technology these type of jobs are beyond recovery.

The hard drive recovery process is very complex and requires a lot of specialized data recovery engineering tools and knowledge, and level 6+ failures require a class 100 cleanroom.

As a business owner or technical decision-maker in Nymboida, New South Wales, Australia, you understand the importance of partnering with a reliable and innovative engineering and product development company. For over two decades, COLETEK has been proudly serving businesses across Nymboida, New South Wales, Australia, delivering cutting-edge solutions that drive growth and success. Our multidisciplinary team of engineers and product developers is dedicated to understanding your unique needs and challenges. With offices established in 2001, we have built a reputation as a trusted national provider of engineering and product development services. Our extensive experience has equipped us with the capability to tackle diverse projects, from concept design to production-ready solutions. COLETEK's dedication to collaboration and innovation sets us apart from other engineering and product development companies. We take pride in our ability to work closely with clients, understanding their goals and objectives, and developing tailored approaches that drive results. Our team's expertise spans multiple disciplines, allowing us to tackle complex projects that require a comprehensive understanding of cutting-edge technologies. Based in Nymboida, New South Wales, Australia, we have the privilege of serving businesses throughout this region. We understand the unique challenges faced by local companies and are committed to supporting their growth and development. Our national reputation has been built on our ability to deliver results-driven solutions that meet the specific needs of businesses in Nymboida, New South Wales, Australia. As a trusted partner for engineering and product development, COLETEK is focused on delivering reliability, capability, and collaboration. We understand that each project presents a unique set of challenges, and we are committed to providing tailored approaches that drive success. Operating throughout Nymboida, New South Wales, Australia, we are well-positioned to support local businesses in achieving their goals. If you're looking for a trusted partner to help you build something remarkable, look no further than COLETEK. Let's work together to bring your vision to life.