Data Recovery & Backup Solutions for Corndale

If you heard your hard drive making a ticking noise, you have a hardware issue (disconnect your hard drive right away), which is costly to fix - but in most cases we can recovery your data.

1. IC Logic Board PCB
2. Motor/Spindle
3. Physical Heads
4. Heads Movement
5. Actuator
6. Actuator Arm
7. Platters
8. Protective Cover
9. Chassis
10. Firmware Examination
11. Image Repair Drive

• Level 1 - Logical: No physical damage, Logical minor file system corruption as a result of a possible windows update, user error or possible virus.
• Level 2 - Mechanical/Logical: Disk with up to 1% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 3 - Mechanical/Logical: Disk with up to 5% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 4 - Mechanical/Logical: Disk with up to 10% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without bad sectors but with a massive logical corruption of the file system and possibly overwritten data, etc.
• Level 5 - Firmware/Mechanical/Electronic: Disk with corrupted firmware modules and with at least 1% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without physical damage but with disk encryption applied and underlying file system corruption. This level also covers electronic faults of the board PCB.
• Level 6 - Physical/Mechanical/Firmware: clean room job for physically damaged drive with either R/W heads stiction condition, or with at least one faulty R/W in the stack. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 7 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp without obvious magnetic platters damage. These jobs will be defined as recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 8 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp with obvious magnetic platters damage. These jobs will be defined as top complexity recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not – the success rate in these type of cases will be lower because of the magnetic platters damage. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption. In some of the cases only partial recovery may be possible.
• Not Recoverable: drives with excessive magnetic platters damage – usually carved rings and highly contaminated drive chamber as a result of the carved black particles. With current technology these type of jobs are beyond recovery.

The hard drive recovery process is very complex and requires a lot of specialized data recovery engineering tools and knowledge, and level 6+ failures require a class 100 cleanroom.

As a multidisciplinary Australian engineering and product development company established in 2001, COLETEK has earned a reputation for delivering innovative solutions that address the unique needs of businesses across Corndale, New South Wales, Australia. Over two decades, we've built strong relationships with customers across various industries, from manufacturing to agriculture, and consistently demonstrated our commitment to collaboration, reliability, and capability. Our expertise in engineering and product development has allowed us to support local businesses throughout Corndale, New South Wales, Australia, helping them overcome challenges, optimize operations, and drive growth. By drawing on our national reputation for trustworthiness, technical know-how, and creative problem-solving, we empower clients to pursue their vision with confidence. Whether you're looking to streamline processes, develop new products, or simply need guidance on how to improve efficiency and productivity, COLETEK is well-equipped to assist. Our team is dedicated to understanding the distinct needs of each project, from concept to implementation, ensuring that the end result meets the highest standards. By partnering with COLETEK, businesses in Corndale, New South Wales, Australia benefit from direct access to our team's collective expertise and a deep understanding of the local market. We take pride in our ability to tailor solutions to meet the unique requirements of clients operating throughout Corndale, New South Wales, Australia. Looking for a reliable partner to help drive your next project forward? Based in Corndale, New South Wales, Australia, COLETEK is poised to support your business every step of the way. Serving businesses across Corndale, New South Wales, Australia, we're committed to delivering exceptional results that meet the highest standards.