Data Recovery & Backup Solutions for Brooms Head

If you heard your hard drive making a ticking noise, you have a hardware issue (disconnect your hard drive right away), which is costly to fix - but in most cases we can recovery your data.

1. IC Logic Board PCB
2. Motor/Spindle
3. Physical Heads
4. Heads Movement
5. Actuator
6. Actuator Arm
7. Platters
8. Protective Cover
9. Chassis
10. Firmware Examination
11. Image Repair Drive

• Level 1 - Logical: No physical damage, Logical minor file system corruption as a result of a possible windows update, user error or possible virus.
• Level 2 - Mechanical/Logical: Disk with up to 1% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 3 - Mechanical/Logical: Disk with up to 5% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 4 - Mechanical/Logical: Disk with up to 10% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without bad sectors but with a massive logical corruption of the file system and possibly overwritten data, etc.
• Level 5 - Firmware/Mechanical/Electronic: Disk with corrupted firmware modules and with at least 1% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without physical damage but with disk encryption applied and underlying file system corruption. This level also covers electronic faults of the board PCB.
• Level 6 - Physical/Mechanical/Firmware: clean room job for physically damaged drive with either R/W heads stiction condition, or with at least one faulty R/W in the stack. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 7 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp without obvious magnetic platters damage. These jobs will be defined as recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 8 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp with obvious magnetic platters damage. These jobs will be defined as top complexity recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not – the success rate in these type of cases will be lower because of the magnetic platters damage. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption. In some of the cases only partial recovery may be possible.
• Not Recoverable: drives with excessive magnetic platters damage – usually carved rings and highly contaminated drive chamber as a result of the carved black particles. With current technology these type of jobs are beyond recovery.

The hard drive recovery process is very complex and requires a lot of specialized data recovery engineering tools and knowledge, and level 6+ failures require a class 100 cleanroom.

As a local business owner or technical decision-maker in Brooms Head, New South Wales, Australia, you understand the importance of partnering with a trusted and innovative partner. COLETEK is that partner, offering unmatched expertise in engineering and product development since 2001. Our multidisciplinary team has earned a reputation for delivering reliable solutions, fostering collaboration, and empowering businesses to achieve their goals. At Brooms Head, New South Wales, Australia, we're proud to operate throughout this region, supporting local businesses just like yours. With our national presence, you can rest assured that we'll be with you every step of the way – from initial consultation to project completion. Our extensive experience working with diverse industries and organizations has equipped us to tackle complex challenges and develop creative solutions tailored to your specific needs. As a trusted partner in Brooms Head, New South Wales, Australia, COLETEK is committed to helping local businesses thrive. We collaborate closely with our clients to understand their unique requirements, leveraging our expertise in engineering and product development to deliver exceptional results. Whether you're looking to improve operational efficiency, develop new products or services, or drive innovation, we'll work tirelessly to address your needs. Our proven track record, combined with a passion for delivering exceptional outcomes, sets us apart from other companies operating in Brooms Head, New South Wales, Australia. So why settle for mediocrity when you can achieve greatness? Partner with COLETEK and let's build something remarkable together.