Data Recovery & Backup Solutions for Westdale

If you heard your hard drive making a ticking noise, you have a hardware issue (disconnect your hard drive right away), which is costly to fix - but in most cases we can recovery your data.

1. IC Logic Board PCB
2. Motor/Spindle
3. Physical Heads
4. Heads Movement
5. Actuator
6. Actuator Arm
7. Platters
8. Protective Cover
9. Chassis
10. Firmware Examination
11. Image Repair Drive

• Level 1 - Logical: No physical damage, Logical minor file system corruption as a result of a possible windows update, user error or possible virus.
• Level 2 - Mechanical/Logical: Disk with up to 1% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 3 - Mechanical/Logical: Disk with up to 5% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 4 - Mechanical/Logical: Disk with up to 10% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without bad sectors but with a massive logical corruption of the file system and possibly overwritten data, etc.
• Level 5 - Firmware/Mechanical/Electronic: Disk with corrupted firmware modules and with at least 1% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without physical damage but with disk encryption applied and underlying file system corruption. This level also covers electronic faults of the board PCB.
• Level 6 - Physical/Mechanical/Firmware: clean room job for physically damaged drive with either R/W heads stiction condition, or with at least one faulty R/W in the stack. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 7 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp without obvious magnetic platters damage. These jobs will be defined as recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 8 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp with obvious magnetic platters damage. These jobs will be defined as top complexity recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not – the success rate in these type of cases will be lower because of the magnetic platters damage. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption. In some of the cases only partial recovery may be possible.
• Not Recoverable: drives with excessive magnetic platters damage – usually carved rings and highly contaminated drive chamber as a result of the carved black particles. With current technology these type of jobs are beyond recovery.

The hard drive recovery process is very complex and requires a lot of specialized data recovery engineering tools and knowledge, and level 6+ failures require a class 100 cleanroom.

At COLETEK, we're proud to be a multidisciplinary Australian engineering and product development company established in 2001. With over two decades of experience, our team has consistently delivered innovation and reliability to businesses across Westdale, New South Wales, Australia and throughout the country. As a trusted national reputation is built on a foundation of capability, collaboration, and a deep understanding of the unique challenges faced by local industries. Our experts are dedicated to supporting the growth and success of businesses like yours in Westdale, New South Wales, Australia, providing tailored solutions that drive real results. From concept design through to production, COLETEK brings together diverse expertise from engineering, product development, and beyond. By leveraging this multidisciplinary approach, we empower our clients with the confidence to tackle even the most complex challenges. Whether you're seeking support in manufacturing, electronics, or other areas, our team is well-equipped to provide strategic guidance and practical solutions that meet your specific needs. As a trusted partner for businesses across Westdale, New South Wales, Australia, COLETEK offers a unique advantage through our extensive experience in engineering and product development. By partnering with us, you'll gain access to the collective expertise of a team that has delivered innovative solutions throughout various industries and regions. Our commitment to reliability, collaboration, and capability ensures that your project receives the attention it deserves, from conception to delivery. If you're looking for a trusted partner to support your organization's growth and success in Westdale, New South Wales, Australia, look no further than COLETEK. Let us bring our expertise and resources to bear on your most pressing challenges.