Data Recovery & Backup Solutions for Walcha Road

If you heard your hard drive making a ticking noise, you have a hardware issue (disconnect your hard drive right away), which is costly to fix - but in most cases we can recovery your data.

1. IC Logic Board PCB
2. Motor/Spindle
3. Physical Heads
4. Heads Movement
5. Actuator
6. Actuator Arm
7. Platters
8. Protective Cover
9. Chassis
10. Firmware Examination
11. Image Repair Drive

• Level 1 - Logical: No physical damage, Logical minor file system corruption as a result of a possible windows update, user error or possible virus.
• Level 2 - Mechanical/Logical: Disk with up to 1% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 3 - Mechanical/Logical: Disk with up to 5% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 4 - Mechanical/Logical: Disk with up to 10% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without bad sectors but with a massive logical corruption of the file system and possibly overwritten data, etc.
• Level 5 - Firmware/Mechanical/Electronic: Disk with corrupted firmware modules and with at least 1% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without physical damage but with disk encryption applied and underlying file system corruption. This level also covers electronic faults of the board PCB.
• Level 6 - Physical/Mechanical/Firmware: clean room job for physically damaged drive with either R/W heads stiction condition, or with at least one faulty R/W in the stack. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 7 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp without obvious magnetic platters damage. These jobs will be defined as recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 8 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp with obvious magnetic platters damage. These jobs will be defined as top complexity recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not – the success rate in these type of cases will be lower because of the magnetic platters damage. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption. In some of the cases only partial recovery may be possible.
• Not Recoverable: drives with excessive magnetic platters damage – usually carved rings and highly contaminated drive chamber as a result of the carved black particles. With current technology these type of jobs are beyond recovery.

The hard drive recovery process is very complex and requires a lot of specialized data recovery engineering tools and knowledge, and level 6+ failures require a class 100 cleanroom.

As a multidisciplinary Australian engineering and product development company established in 2001, COLETEK has built a reputation as a reliable partner for businesses across Walcha Road, New South Wales, Australia. Our team of experts operates from this location, serving businesses directly and bringing expertise to every corner of the region. With years of experience working with companies spanning various industries, we're well-placed to support your growth and innovation. At COLETEK, our focus is on collaboration, capability, and reliability – three essential qualities for engineering and product development success. Our national reputation as a trusted partner has been built by delivering tailored solutions that meet the unique needs of each client. Based in Walcha Road, New South Wales, Australia, we have a deep understanding of the local business landscape and are dedicated to providing support to companies throughout this area, as well as across Australia. Whether you're looking for engineering expertise, innovative product design, or effective problem-solving, we're here to help. Our company is not just an engineering company; it's a trusted partner that can guide your project from concept through to delivery. We possess the capability, experience, and resources to tackle even the most complex challenges. By working closely with you, our team will leverage its multidisciplinary expertise to co-create solutions that meet your unique goals. As you navigate the demands of running a business in Walcha Road, New South Wales, Australia, COLETEK is here to support your success. We'd be delighted to bring our experience and capabilities to bear on your projects, helping you overcome challenges and create opportunities for growth. Now, let's build something remarkable together.