Data Recovery & Backup Solutions for Ogunbil

If you heard your hard drive making a ticking noise, you have a hardware issue (disconnect your hard drive right away), which is costly to fix - but in most cases we can recovery your data.

1. IC Logic Board PCB
2. Motor/Spindle
3. Physical Heads
4. Heads Movement
5. Actuator
6. Actuator Arm
7. Platters
8. Protective Cover
9. Chassis
10. Firmware Examination
11. Image Repair Drive

• Level 1 - Logical: No physical damage, Logical minor file system corruption as a result of a possible windows update, user error or possible virus.
• Level 2 - Mechanical/Logical: Disk with up to 1% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 3 - Mechanical/Logical: Disk with up to 5% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 4 - Mechanical/Logical: Disk with up to 10% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without bad sectors but with a massive logical corruption of the file system and possibly overwritten data, etc.
• Level 5 - Firmware/Mechanical/Electronic: Disk with corrupted firmware modules and with at least 1% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without physical damage but with disk encryption applied and underlying file system corruption. This level also covers electronic faults of the board PCB.
• Level 6 - Physical/Mechanical/Firmware: clean room job for physically damaged drive with either R/W heads stiction condition, or with at least one faulty R/W in the stack. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 7 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp without obvious magnetic platters damage. These jobs will be defined as recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 8 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp with obvious magnetic platters damage. These jobs will be defined as top complexity recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not – the success rate in these type of cases will be lower because of the magnetic platters damage. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption. In some of the cases only partial recovery may be possible.
• Not Recoverable: drives with excessive magnetic platters damage – usually carved rings and highly contaminated drive chamber as a result of the carved black particles. With current technology these type of jobs are beyond recovery.

The hard drive recovery process is very complex and requires a lot of specialized data recovery engineering tools and knowledge, and level 6+ failures require a class 100 cleanroom.

At COLETEK, we're proud to be a multidisciplinary Australian engineering and product development company established in 2001. For almost two decades, we've been supporting businesses across Ogunbil, New South Wales, Australia, and throughout the country, helping them bring innovative ideas to life. Our extensive experience has equipped us with the expertise to address the most complex challenges faced by businesses in Ogunbil. We take pride in our collaborative approach, working closely with clients to understand their unique needs and deliver tailored solutions that drive growth and profitability. Whether you're seeking cutting-edge engineering solutions or looking to enhance your operations, we've got you covered. As a trusted national player, COLETEK has consistently demonstrated its capability to adapt to the evolving needs of Australian businesses. Our team of experts is well-versed in the latest technologies, methodologies, and best practices, ensuring that our clients receive the highest level of support. We're committed to understanding the regional pulse of industries like yours, leveraging this knowledge to develop solutions that meet the specific demands of Ogunbil's commercial landscape. In a region where innovation and technological advancements are transforming Traditional industries, COLETEK is here to help your business thrive. Our extensive experience in the Australian market has honed our ability to understand the unique needs of Ogunbil businesses, whether you're operating in manufacturing, agriculture, or services. By partnering with us, you can rely on COLETEK's engineering and product development expertise to drive success. Don't just take our word for it – let our track record speak for itself. COLETEK has supported numerous successful projects across a range of industries, consistently delivering results that exceed client expectations. We're proud of our reputation as a reliable partner for businesses throughout Ogunbil, New South Wales, Australia.