Data Recovery & Backup Solutions for Boomi

If you heard your hard drive making a ticking noise, you have a hardware issue (disconnect your hard drive right away), which is costly to fix - but in most cases we can recovery your data.

1. IC Logic Board PCB
2. Motor/Spindle
3. Physical Heads
4. Heads Movement
5. Actuator
6. Actuator Arm
7. Platters
8. Protective Cover
9. Chassis
10. Firmware Examination
11. Image Repair Drive

• Level 1 - Logical: No physical damage, Logical minor file system corruption as a result of a possible windows update, user error or possible virus.
• Level 2 - Mechanical/Logical: Disk with up to 1% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 3 - Mechanical/Logical: Disk with up to 5% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 4 - Mechanical/Logical: Disk with up to 10% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without bad sectors but with a massive logical corruption of the file system and possibly overwritten data, etc.
• Level 5 - Firmware/Mechanical/Electronic: Disk with corrupted firmware modules and with at least 1% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without physical damage but with disk encryption applied and underlying file system corruption. This level also covers electronic faults of the board PCB.
• Level 6 - Physical/Mechanical/Firmware: clean room job for physically damaged drive with either R/W heads stiction condition, or with at least one faulty R/W in the stack. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 7 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp without obvious magnetic platters damage. These jobs will be defined as recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 8 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp with obvious magnetic platters damage. These jobs will be defined as top complexity recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not – the success rate in these type of cases will be lower because of the magnetic platters damage. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption. In some of the cases only partial recovery may be possible.
• Not Recoverable: drives with excessive magnetic platters damage – usually carved rings and highly contaminated drive chamber as a result of the carved black particles. With current technology these type of jobs are beyond recovery.

The hard drive recovery process is very complex and requires a lot of specialized data recovery engineering tools and knowledge, and level 6+ failures require a class 100 cleanroom.

At COLETEK, we've built a reputation as a trusted and innovative multidisciplinary Australian engineering and product development company established in 2001. With our extensive experience and expertise, we're well-positioned to support businesses across Boomi, New South Wales, Australia, and throughout the country. As a local company based in Boomi, New South Wales, Australia, we understand the unique challenges faced by regional organizations. We're committed to providing reliability and collaboration that sets us apart from others in the industry. Our team of experts is dedicated to working closely with our clients to deliver effective solutions that meet their specific needs. COLETEK has a proven track record of successfully delivering complex projects across various sectors, including mining, energy, water infrastructure, and more. We take pride in our ability to operate efficiently, even in remote locations like Boomi, New South Wales, Australia. Our experience spans multiple industries, allowing us to provide expertise that transcends individual domains. By partnering with COLETEK, businesses in Boomi, New South Wales, Australia, can tap into our collective knowledge and capabilities to overcome the challenges they face. We're not just engineers – we're problem-solvers who are passionate about collaboration. Our local presence in Boomi, New South Wales, Australia, means we understand the subtleties of regional operations and can tailor our approach to meet the unique demands of each project. Whether your organization is looking for innovative solutions or simply needs reliable engineering expertise, COLETEK is here to support you every step of the way. We're not just a company – we're a trusted partner that operates throughout Boomi, New South Wales, Australia, and beyond. Join forces with us, and let's build something remarkable together.