Data Recovery & Backup Solutions for Kalang

If you heard your hard drive making a ticking noise, you have a hardware issue (disconnect your hard drive right away), which is costly to fix - but in most cases we can recovery your data.

1. IC Logic Board PCB
2. Motor/Spindle
3. Physical Heads
4. Heads Movement
5. Actuator
6. Actuator Arm
7. Platters
8. Protective Cover
9. Chassis
10. Firmware Examination
11. Image Repair Drive

• Level 1 - Logical: No physical damage, Logical minor file system corruption as a result of a possible windows update, user error or possible virus.
• Level 2 - Mechanical/Logical: Disk with up to 1% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 3 - Mechanical/Logical: Disk with up to 5% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 4 - Mechanical/Logical: Disk with up to 10% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without bad sectors but with a massive logical corruption of the file system and possibly overwritten data, etc.
• Level 5 - Firmware/Mechanical/Electronic: Disk with corrupted firmware modules and with at least 1% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without physical damage but with disk encryption applied and underlying file system corruption. This level also covers electronic faults of the board PCB.
• Level 6 - Physical/Mechanical/Firmware: clean room job for physically damaged drive with either R/W heads stiction condition, or with at least one faulty R/W in the stack. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 7 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp without obvious magnetic platters damage. These jobs will be defined as recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 8 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp with obvious magnetic platters damage. These jobs will be defined as top complexity recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not – the success rate in these type of cases will be lower because of the magnetic platters damage. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption. In some of the cases only partial recovery may be possible.
• Not Recoverable: drives with excessive magnetic platters damage – usually carved rings and highly contaminated drive chamber as a result of the carved black particles. With current technology these type of jobs are beyond recovery.

The hard drive recovery process is very complex and requires a lot of specialized data recovery engineering tools and knowledge, and level 6+ failures require a class 100 cleanroom.

At COLETEK, we're proud to be a multidisciplinary Australian engineering and product development company established in 2001. Over the past two decades, we've built a reputation as a trusted national partner, serving businesses across Kalang, New South Wales, Australia and beyond. When it comes to innovation and reliability, we've got you covered. Our team of experts is passionate about developing cutting-edge products that exceed our clients' expectations. As a business owner or technical decision-maker in Kalang, New South Wales, Australia, you're likely no stranger to the challenges of staying ahead of the curve in your industry. That's where COLETEK comes in – we offer more than just engineering and product development expertise; we partner with businesses like yours to understand their unique needs and develop solutions that meet those demands. Our approach is centered around collaboration, reliability, and a deep understanding of the local market. Whether you're looking to improve your existing operations or launch a new product or service, our team is equipped to support businesses in Kalang, New South Wales, Australia throughout the entire process. From concept to reality, we'll work tirelessly with you to ensure that your project achieves its desired outcomes. With COLETEK by your side, you can trust that your project will be handled with precision and care. Our passion for innovation, combined with our commitment to reliability and collaboration, sets us apart from other engineering and product development companies operating throughout Kalang, New South Wales, Australia.