Data Recovery & Backup Solutions for Innes View

If you heard your hard drive making a ticking noise, you have a hardware issue (disconnect your hard drive right away), which is costly to fix - but in most cases we can recovery your data.

1. IC Logic Board PCB
2. Motor/Spindle
3. Physical Heads
4. Heads Movement
5. Actuator
6. Actuator Arm
7. Platters
8. Protective Cover
9. Chassis
10. Firmware Examination
11. Image Repair Drive

• Level 1 - Logical: No physical damage, Logical minor file system corruption as a result of a possible windows update, user error or possible virus.
• Level 2 - Mechanical/Logical: Disk with up to 1% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 3 - Mechanical/Logical: Disk with up to 5% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 4 - Mechanical/Logical: Disk with up to 10% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without bad sectors but with a massive logical corruption of the file system and possibly overwritten data, etc.
• Level 5 - Firmware/Mechanical/Electronic: Disk with corrupted firmware modules and with at least 1% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without physical damage but with disk encryption applied and underlying file system corruption. This level also covers electronic faults of the board PCB.
• Level 6 - Physical/Mechanical/Firmware: clean room job for physically damaged drive with either R/W heads stiction condition, or with at least one faulty R/W in the stack. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 7 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp without obvious magnetic platters damage. These jobs will be defined as recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 8 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp with obvious magnetic platters damage. These jobs will be defined as top complexity recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not – the success rate in these type of cases will be lower because of the magnetic platters damage. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption. In some of the cases only partial recovery may be possible.
• Not Recoverable: drives with excessive magnetic platters damage – usually carved rings and highly contaminated drive chamber as a result of the carved black particles. With current technology these type of jobs are beyond recovery.

The hard drive recovery process is very complex and requires a lot of specialized data recovery engineering tools and knowledge, and level 6+ failures require a class 100 cleanroom.

As a business owner in Innes View, New South Wales, Australia, you understand the importance of partnering with a trusted company that can help you innovate and grow. That's where COLETEK comes in – a multidisciplinary Australian engineering and product development company established in 2001. Our team of experts has years of experience helping businesses like yours across Innes View, New South Wales, Australia, and throughout the country. Based in Innes View, New South Wales, Australia, we operate throughout to provide reliable solutions that cater to your specific needs. Our trusted national reputation is built on a foundation of collaboration, innovation, and capability. As a company that's serving businesses across Innes View, New South Wales, Australia, you can count on us to deliver exceptional results. At COLETEK, we pride ourselves on being more than just an engineering firm – we're partners in your success. Our experts work closely with you to understand your unique challenges and develop tailored solutions that drive business outcomes. Whether you're looking to enhance customer experience, improve operational efficiency, or launch a new product, our team is equipped to help. By partnering with us, you'll gain access to cutting-edge expertise, innovative thinking, and a deep understanding of the Innes View, New South Wales, Australia market. We understand the importance of staying ahead of the curve in today's fast-paced business environment, and our solutions are designed to give you that competitive edge. So why settle for anything less when you can achieve remarkable results with COLETEK? Let us help you take your business to the next level. Operating throughout Innes View, New South Wales, Australia, we're committed to delivering exceptional engineering and product development solutions that drive success. For more information or to get started, please contact us today.