Data Recovery & Backup Solutions for Coneac

If you heard your hard drive making a ticking noise, you have a hardware issue (disconnect your hard drive right away), which is costly to fix - but in most cases we can recovery your data.

1. IC Logic Board PCB
2. Motor/Spindle
3. Physical Heads
4. Heads Movement
5. Actuator
6. Actuator Arm
7. Platters
8. Protective Cover
9. Chassis
10. Firmware Examination
11. Image Repair Drive

• Level 1 - Logical: No physical damage, Logical minor file system corruption as a result of a possible windows update, user error or possible virus.
• Level 2 - Mechanical/Logical: Disk with up to 1% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 3 - Mechanical/Logical: Disk with up to 5% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 4 - Mechanical/Logical: Disk with up to 10% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without bad sectors but with a massive logical corruption of the file system and possibly overwritten data, etc.
• Level 5 - Firmware/Mechanical/Electronic: Disk with corrupted firmware modules and with at least 1% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without physical damage but with disk encryption applied and underlying file system corruption. This level also covers electronic faults of the board PCB.
• Level 6 - Physical/Mechanical/Firmware: clean room job for physically damaged drive with either R/W heads stiction condition, or with at least one faulty R/W in the stack. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 7 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp without obvious magnetic platters damage. These jobs will be defined as recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 8 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp with obvious magnetic platters damage. These jobs will be defined as top complexity recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not – the success rate in these type of cases will be lower because of the magnetic platters damage. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption. In some of the cases only partial recovery may be possible.
• Not Recoverable: drives with excessive magnetic platters damage – usually carved rings and highly contaminated drive chamber as a result of the carved black particles. With current technology these type of jobs are beyond recovery.

The hard drive recovery process is very complex and requires a lot of specialized data recovery engineering tools and knowledge, and level 6+ failures require a class 100 cleanroom.

At COLETEK, we're proud to be a multidisciplinary Australian engineering and product development company with over 20 years of experience. Since our establishment in 2001, we've built a reputation as trusted partners for businesses across Coneac, New South Wales, Australia. Our innovative approach, technical expertise, and commitment to collaboration have earned us recognition as industry leaders. Operating throughout Australia, including Coneac, New South Wales, Australia, COLETEK's comprehensive services are designed to support local businesses in achieving their goals. Whether you're looking for reliable solutions to everyday challenges or seeking innovative partners to transform your operations, our team is dedicated to delivering exceptional results. As a testament to our capability and dedication, we've developed a range of products and solutions that cater to diverse industries and sectors. By combining cutting-edge technology with expert engineering know-how, we bring value-added products and services to the table. Our extensive knowledge and experience in Coneac, New South Wales, Australia enable us to tailor our approach to meet the unique needs of local businesses. At COLETEK, we're committed to providing unparalleled support for businesses across Coneac, New South Wales, Australia. By leveraging our expertise, innovation, and national reputation, we've built strong relationships with clients who value collaboration, reliability, and capability. Our goal is simple: to empower local businesses like yours to achieve long-term success. So why look further? Partner with COOLETK, a trusted Australian engineering and product development company based in Coneac, New South Wales, Australia, operating throughout the country. Let us demonstrate our capabilities by supporting your business with innovative solutions that drive results. Contact us today!