Data Recovery & Backup Solutions for Burrapine

If you heard your hard drive making a ticking noise, you have a hardware issue (disconnect your hard drive right away), which is costly to fix - but in most cases we can recovery your data.

1. IC Logic Board PCB
2. Motor/Spindle
3. Physical Heads
4. Heads Movement
5. Actuator
6. Actuator Arm
7. Platters
8. Protective Cover
9. Chassis
10. Firmware Examination
11. Image Repair Drive

• Level 1 - Logical: No physical damage, Logical minor file system corruption as a result of a possible windows update, user error or possible virus.
• Level 2 - Mechanical/Logical: Disk with up to 1% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 3 - Mechanical/Logical: Disk with up to 5% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 4 - Mechanical/Logical: Disk with up to 10% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without bad sectors but with a massive logical corruption of the file system and possibly overwritten data, etc.
• Level 5 - Firmware/Mechanical/Electronic: Disk with corrupted firmware modules and with at least 1% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without physical damage but with disk encryption applied and underlying file system corruption. This level also covers electronic faults of the board PCB.
• Level 6 - Physical/Mechanical/Firmware: clean room job for physically damaged drive with either R/W heads stiction condition, or with at least one faulty R/W in the stack. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 7 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp without obvious magnetic platters damage. These jobs will be defined as recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 8 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp with obvious magnetic platters damage. These jobs will be defined as top complexity recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not – the success rate in these type of cases will be lower because of the magnetic platters damage. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption. In some of the cases only partial recovery may be possible.
• Not Recoverable: drives with excessive magnetic platters damage – usually carved rings and highly contaminated drive chamber as a result of the carved black particles. With current technology these type of jobs are beyond recovery.

The hard drive recovery process is very complex and requires a lot of specialized data recovery engineering tools and knowledge, and level 6+ failures require a class 100 cleanroom.

As a trusted engineering and product development partner, COLETEK has been serving businesses across Burrapine, New South Wales, Australia since 2001. Our multidisciplinary team of experts is dedicated to delivering reliable and innovative solutions that exceed our clients' expectations. With a strong national reputation built on trust, collaboration, and capability, we are committed to empowering local businesses like yours in Burrapine, New South Wales, Australia. Our expertise spans a wide range of industries, from agriculture to construction, manufacturing to technology, and more. We understand the unique challenges faced by businesses operating in Burrapine, New South Wales, Australia, and our team is well-equipped to provide tailored solutions that meet your specific needs. At COLETEK, we believe in building strong relationships with our clients and partners based in Burrapine, New South Wales, Australia. Our collaborative approach ensures that you receive exceptional support throughout every stage of the project, from concept design to implementation and beyond. We take pride in being a one-stop-shop for all your engineering and product development needs, providing end-to-end solutions that drive growth and profitability. Operating throughout Burrapine, New South Wales, Australia and further afield, we have earned a reputation for delivering high-quality results on time and within budget. Our team's expertise is backed by a culture of continuous learning and innovation, ensuring our solutions remain ahead of the curve as your business evolves. As you look to take your business in Burrapine, New South Wales, Australia to the next level, COLETEK is here to support you every step of the way. With our expertise, creativity, and collaborative approach, we're confident that together we can achieve remarkable things.