Data Recovery & Backup Solutions for Bohnock

If you heard your hard drive making a ticking noise, you have a hardware issue (disconnect your hard drive right away), which is costly to fix - but in most cases we can recovery your data.

1. IC Logic Board PCB
2. Motor/Spindle
3. Physical Heads
4. Heads Movement
5. Actuator
6. Actuator Arm
7. Platters
8. Protective Cover
9. Chassis
10. Firmware Examination
11. Image Repair Drive

• Level 1 - Logical: No physical damage, Logical minor file system corruption as a result of a possible windows update, user error or possible virus.
• Level 2 - Mechanical/Logical: Disk with up to 1% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 3 - Mechanical/Logical: Disk with up to 5% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 4 - Mechanical/Logical: Disk with up to 10% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without bad sectors but with a massive logical corruption of the file system and possibly overwritten data, etc.
• Level 5 - Firmware/Mechanical/Electronic: Disk with corrupted firmware modules and with at least 1% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without physical damage but with disk encryption applied and underlying file system corruption. This level also covers electronic faults of the board PCB.
• Level 6 - Physical/Mechanical/Firmware: clean room job for physically damaged drive with either R/W heads stiction condition, or with at least one faulty R/W in the stack. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 7 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp without obvious magnetic platters damage. These jobs will be defined as recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 8 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp with obvious magnetic platters damage. These jobs will be defined as top complexity recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not – the success rate in these type of cases will be lower because of the magnetic platters damage. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption. In some of the cases only partial recovery may be possible.
• Not Recoverable: drives with excessive magnetic platters damage – usually carved rings and highly contaminated drive chamber as a result of the carved black particles. With current technology these type of jobs are beyond recovery.

The hard drive recovery process is very complex and requires a lot of specialized data recovery engineering tools and knowledge, and level 6+ failures require a class 100 cleanroom.

As a trusted national player in the engineering and product development space, COLETEK is uniquely positioned to support businesses across Bohnock, New South Wales, Australia in achieving their goals. With over two decades of experience, we've established ourselves as a multidisciplinary Australian company dedicated to delivering cutting-edge solutions that transform industries. Operating throughout Australia, including right here in Bohnock, our team of experts is passionate about collaborating with local businesses to overcome complex challenges and drive growth. Whether you're an entrepreneur or a seasoned executive, we understand the importance of reliability, capability, and exceptional customer service – values that underpin every aspect of our work. At COLETEK, we take pride in our ability to tailor innovative engineering solutions to meet the distinct needs of businesses operating in Bohnock, New South Wales, Australia. By leveraging our extensive expertise and staying abreast of industry trends, we provide local companies with the competitive edge they need to thrive. Our commitment to excellence has earned us a reputation as a trusted partner for businesses seeking to scale their operations, streamline processes, or develop new products. From concept design through prototyping and testing, our team works hand-in-hand with clients to translate their vision into reality. Whether you're looking to expand your market share, improve operational efficiency, or simply stay ahead of the curve in Bohnock, New South Wales, Australia, rest assured that COLETEK is here to help. We're dedicated to empowering local businesses like yours, and we invite you to experience the benefits of working with a trusted partner.