Data Recovery & Backup Solutions for Bellangry

If you heard your hard drive making a ticking noise, you have a hardware issue (disconnect your hard drive right away), which is costly to fix - but in most cases we can recovery your data.

1. IC Logic Board PCB
2. Motor/Spindle
3. Physical Heads
4. Heads Movement
5. Actuator
6. Actuator Arm
7. Platters
8. Protective Cover
9. Chassis
10. Firmware Examination
11. Image Repair Drive

• Level 1 - Logical: No physical damage, Logical minor file system corruption as a result of a possible windows update, user error or possible virus.
• Level 2 - Mechanical/Logical: Disk with up to 1% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 3 - Mechanical/Logical: Disk with up to 5% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 4 - Mechanical/Logical: Disk with up to 10% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without bad sectors but with a massive logical corruption of the file system and possibly overwritten data, etc.
• Level 5 - Firmware/Mechanical/Electronic: Disk with corrupted firmware modules and with at least 1% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without physical damage but with disk encryption applied and underlying file system corruption. This level also covers electronic faults of the board PCB.
• Level 6 - Physical/Mechanical/Firmware: clean room job for physically damaged drive with either R/W heads stiction condition, or with at least one faulty R/W in the stack. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 7 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp without obvious magnetic platters damage. These jobs will be defined as recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 8 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp with obvious magnetic platters damage. These jobs will be defined as top complexity recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not – the success rate in these type of cases will be lower because of the magnetic platters damage. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption. In some of the cases only partial recovery may be possible.
• Not Recoverable: drives with excessive magnetic platters damage – usually carved rings and highly contaminated drive chamber as a result of the carved black particles. With current technology these type of jobs are beyond recovery.

The hard drive recovery process is very complex and requires a lot of specialized data recovery engineering tools and knowledge, and level 6+ failures require a class 100 cleanroom.

As a proud nation-wide engineering and product development company, COLETEK has been serving businesses across Bellangry, New South Wales, Australia for over two decades. Since our establishment in 2001, we've earned a reputation for being a trusted partner that brings innovative solutions to the table. Our multidisciplinary team, comprising experts from various engineering disciplines, is dedicated to delivering exceptional results that exceed our clients' expectations. With a strong presence in Bellangry, New South Wales, Australia and throughout the country, COLETEK has had the privilege of collaborating with businesses from diverse sectors, each facing unique challenges. As a national player, we understand the nuances of different regions and are well-equipped to support companies operating across Bellangry, New South Wales, Australia, and beyond. Our comprehensive approach allows us to tackle complex problems, leverage our expertise in engineering and product development, and bring value-added solutions to the table. At COLETEK, reliability is paramount. We take pride in being a dependable partner for businesses in Bellangry, New South Wales, Australia, knowing that their success often hinges on our ability to deliver timely and effective results. Our collaborative approach ensures that we work closely with clients to gain a deep understanding of their needs, develop customized solutions, and execute projects seamlessly. Throughout Bellangry, New South Wales, Australia, COLETEK has earned a reputation for its capability and commitment to excellence. We've helped numerous businesses navigate challenges, capitalize on opportunities, and stay ahead of the curve by leveraging our expertise in engineering and product development. So why choose COLETEK as your trusted partner in Bellangry, New South Wales, Australia? Our answer is simple – because we're committed to building remarkable solutions that leave a lasting impact. If you're looking for collaborative engineers who understand the intricacies of running a business in Bellangry, New South Wales, Australia, we invite you to get in touch.