Data Recovery & Backup Solutions for Cope

If you heard your hard drive making a ticking noise, you have a hardware issue (disconnect your hard drive right away), which is costly to fix - but in most cases we can recovery your data.

1. IC Logic Board PCB
2. Motor/Spindle
3. Physical Heads
4. Heads Movement
5. Actuator
6. Actuator Arm
7. Platters
8. Protective Cover
9. Chassis
10. Firmware Examination
11. Image Repair Drive

• Level 1 - Logical: No physical damage, Logical minor file system corruption as a result of a possible windows update, user error or possible virus.
• Level 2 - Mechanical/Logical: Disk with up to 1% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 3 - Mechanical/Logical: Disk with up to 5% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 4 - Mechanical/Logical: Disk with up to 10% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without bad sectors but with a massive logical corruption of the file system and possibly overwritten data, etc.
• Level 5 - Firmware/Mechanical/Electronic: Disk with corrupted firmware modules and with at least 1% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without physical damage but with disk encryption applied and underlying file system corruption. This level also covers electronic faults of the board PCB.
• Level 6 - Physical/Mechanical/Firmware: clean room job for physically damaged drive with either R/W heads stiction condition, or with at least one faulty R/W in the stack. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 7 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp without obvious magnetic platters damage. These jobs will be defined as recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 8 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp with obvious magnetic platters damage. These jobs will be defined as top complexity recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not – the success rate in these type of cases will be lower because of the magnetic platters damage. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption. In some of the cases only partial recovery may be possible.
• Not Recoverable: drives with excessive magnetic platters damage – usually carved rings and highly contaminated drive chamber as a result of the carved black particles. With current technology these type of jobs are beyond recovery.

The hard drive recovery process is very complex and requires a lot of specialized data recovery engineering tools and knowledge, and level 6+ failures require a class 100 cleanroom.

As a business owner in Cope, New South Wales, Australia, you understand the importance of partnering with reliable and innovative companies to drive your organization's success. For over two decades, Coletek has been serving businesses across Cope, New South Wales, Australia, as a multidisciplinary engineering and product development company established in 2001. Our national reputation is built on trust and our commitment to delivering results-oriented solutions. Based in Cope, New South Wales, Australia, we operate throughout the region, providing exceptional expertise and collaboration that drives business growth. Whether you're looking to innovate a new product or optimize an existing process, Coletek's team of experts will work closely with yours to ensure success. Our comprehensive understanding of Australian industries and market needs enables us to provide tailored solutions that address local challenges. Our company prides itself on its ability to engineer innovative products that meet the demands of various markets. We understand that each business is unique, and our extensive range of capabilities enables us to cater to diverse requirements. Through in-depth collaboration with your team, we listen to your needs and design solutions that drive value creation for your organization. In Cope, New South Wales, Australia, Coletek's dedication to its clients has earned it a spot as a trusted partner for businesses operating throughout the region. By combining our expertise with your vision, you can be assured of achieving outstanding results. We take pride in being more than just an engineering and product development company – we're dedicated to helping Cope, New South Wales, Australia's businesses grow and thrive.