Data Recovery & Backup Solutions for Bruah

If you heard your hard drive making a ticking noise, you have a hardware issue (disconnect your hard drive right away), which is costly to fix - but in most cases we can recovery your data.

1. IC Logic Board PCB
2. Motor/Spindle
3. Physical Heads
4. Heads Movement
5. Actuator
6. Actuator Arm
7. Platters
8. Protective Cover
9. Chassis
10. Firmware Examination
11. Image Repair Drive

• Level 1 - Logical: No physical damage, Logical minor file system corruption as a result of a possible windows update, user error or possible virus.
• Level 2 - Mechanical/Logical: Disk with up to 1% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 3 - Mechanical/Logical: Disk with up to 5% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 4 - Mechanical/Logical: Disk with up to 10% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without bad sectors but with a massive logical corruption of the file system and possibly overwritten data, etc.
• Level 5 - Firmware/Mechanical/Electronic: Disk with corrupted firmware modules and with at least 1% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without physical damage but with disk encryption applied and underlying file system corruption. This level also covers electronic faults of the board PCB.
• Level 6 - Physical/Mechanical/Firmware: clean room job for physically damaged drive with either R/W heads stiction condition, or with at least one faulty R/W in the stack. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 7 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp without obvious magnetic platters damage. These jobs will be defined as recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 8 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp with obvious magnetic platters damage. These jobs will be defined as top complexity recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not – the success rate in these type of cases will be lower because of the magnetic platters damage. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption. In some of the cases only partial recovery may be possible.
• Not Recoverable: drives with excessive magnetic platters damage – usually carved rings and highly contaminated drive chamber as a result of the carved black particles. With current technology these type of jobs are beyond recovery.

The hard drive recovery process is very complex and requires a lot of specialized data recovery engineering tools and knowledge, and level 6+ failures require a class 100 cleanroom.

As a business operating in Bruah, New South Wales, Australia, you're likely no stranger to the challenges that come with managing daily operations. With so many moving parts, it can be difficult to focus on what really matters – growing your company and creating opportunities for success. This is where COLETEK comes in: a multidisciplinary Australian engineering and product development company established in 2001, with a national reputation built on innovation, reliability, and collaboration. For over two decades, we've been proud to serve businesses across Bruah, New South Wales, Australia, as well as throughout the country. Our expertise isn't limited to any one industry or sector – instead, our team is dedicated to taking the time to understand your unique needs and goals, then working closely with you to develop tailored solutions that meet those demands. COLETEK isn't just another engineering company; we're a trusted partner for local businesses in Bruah, New South Wales, Australia. We believe in building strong relationships with our clients, founded on mutual respect and open communication. When you work with us, you can expect a team of experts who will listen carefully to your needs, ask the right questions, and work tirelessly to deliver the best possible results. Through our engineering and product development capabilities, we've helped numerous businesses in Bruah, New South Wales, Australia streamline their operations, increase efficiency, and drive innovation. Whether you're looking to enhance customer experiences, improve supply chain management, or simply find new ways to stay ahead of the competition, COLETEK can help. So why settle for anything less than the best? As a business operating in Bruah, New South Wales, Australia, why not partner with a company that truly understands your needs and has a proven track record of delivering exceptional results? Contact us today to learn more about how we can support you, and let's work together to build something remarkable.