Data Recovery & Backup Solutions for Bourbah

If you heard your hard drive making a ticking noise, you have a hardware issue (disconnect your hard drive right away), which is costly to fix - but in most cases we can recovery your data.

1. IC Logic Board PCB
2. Motor/Spindle
3. Physical Heads
4. Heads Movement
5. Actuator
6. Actuator Arm
7. Platters
8. Protective Cover
9. Chassis
10. Firmware Examination
11. Image Repair Drive

• Level 1 - Logical: No physical damage, Logical minor file system corruption as a result of a possible windows update, user error or possible virus.
• Level 2 - Mechanical/Logical: Disk with up to 1% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 3 - Mechanical/Logical: Disk with up to 5% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 4 - Mechanical/Logical: Disk with up to 10% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without bad sectors but with a massive logical corruption of the file system and possibly overwritten data, etc.
• Level 5 - Firmware/Mechanical/Electronic: Disk with corrupted firmware modules and with at least 1% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without physical damage but with disk encryption applied and underlying file system corruption. This level also covers electronic faults of the board PCB.
• Level 6 - Physical/Mechanical/Firmware: clean room job for physically damaged drive with either R/W heads stiction condition, or with at least one faulty R/W in the stack. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 7 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp without obvious magnetic platters damage. These jobs will be defined as recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 8 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp with obvious magnetic platters damage. These jobs will be defined as top complexity recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not – the success rate in these type of cases will be lower because of the magnetic platters damage. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption. In some of the cases only partial recovery may be possible.
• Not Recoverable: drives with excessive magnetic platters damage – usually carved rings and highly contaminated drive chamber as a result of the carved black particles. With current technology these type of jobs are beyond recovery.

The hard drive recovery process is very complex and requires a lot of specialized data recovery engineering tools and knowledge, and level 6+ failures require a class 100 cleanroom.

As a business owner or technical decision-maker in Bourbah, New South Wales, Australia, you understand the importance of partnering with a reliable and innovative engineering and product development company that can support your operations. Look no further than Coletek, a multidisciplinary Australian company established in 2001. With a national reputation for delivering exceptional results, we're proud to operate throughout Bourbah, New South Wales, Australia, serving businesses across the region. At Coletek, we take pride in our ability to collaborate with local businesses and organizations to bring their innovative ideas to life. Our experienced team of engineers and product developers are dedicated to providing expert solutions that exceed your expectations. By operating based in Bourbah, New South Wales, Australia, we're better equipped to understand the unique challenges facing regional businesses like yours. Our engineering expertise is designed to help you overcome obstacles and achieve success. Whether you require technical support for a new product or innovative solution, our team is capable of handling complex projects that meet your specific needs. With Coletek, you can trust that you'll receive high-quality products and services that are tailored to your unique requirements. We believe in building strong relationships with local businesses like yours, understanding the importance of supporting the regional community we operate within. By doing so, we're committed to delivering exceptional results that drive growth and prosperity for our clients. If you're looking for a trusted engineering and product development partner serving businesses across Bourbah, New South Wales, Australia, look no further than Coletek.