Data Recovery & Backup Solutions for Beryl

If you heard your hard drive making a ticking noise, you have a hardware issue (disconnect your hard drive right away), which is costly to fix - but in most cases we can recovery your data.

1. IC Logic Board PCB
2. Motor/Spindle
3. Physical Heads
4. Heads Movement
5. Actuator
6. Actuator Arm
7. Platters
8. Protective Cover
9. Chassis
10. Firmware Examination
11. Image Repair Drive

• Level 1 - Logical: No physical damage, Logical minor file system corruption as a result of a possible windows update, user error or possible virus.
• Level 2 - Mechanical/Logical: Disk with up to 1% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 3 - Mechanical/Logical: Disk with up to 5% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 4 - Mechanical/Logical: Disk with up to 10% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without bad sectors but with a massive logical corruption of the file system and possibly overwritten data, etc.
• Level 5 - Firmware/Mechanical/Electronic: Disk with corrupted firmware modules and with at least 1% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without physical damage but with disk encryption applied and underlying file system corruption. This level also covers electronic faults of the board PCB.
• Level 6 - Physical/Mechanical/Firmware: clean room job for physically damaged drive with either R/W heads stiction condition, or with at least one faulty R/W in the stack. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 7 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp without obvious magnetic platters damage. These jobs will be defined as recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 8 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp with obvious magnetic platters damage. These jobs will be defined as top complexity recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not – the success rate in these type of cases will be lower because of the magnetic platters damage. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption. In some of the cases only partial recovery may be possible.
• Not Recoverable: drives with excessive magnetic platters damage – usually carved rings and highly contaminated drive chamber as a result of the carved black particles. With current technology these type of jobs are beyond recovery.

The hard drive recovery process is very complex and requires a lot of specialized data recovery engineering tools and knowledge, and level 6+ failures require a class 100 cleanroom.

As a trusted national presence, COLETEK is proud to serve businesses across Beryl, New South Wales, Australia, providing innovative engineering and product development solutions that drive success. Since our inception in 2001, we've established ourselves as a multidisciplinary company capable of tackling complex projects that require tailored approaches. Our reputation for reliability, collaboration, and capability has earned us a loyal following across various industries and sectors. By partnering with us, businesses in Beryl, New South Wales, Australia can tap into our expertise and benefit from our unwavering commitment to excellence. At COLETEK, we understand the unique challenges faced by organizations operating within the Beryl, New South Wales, Australia area. That's why we take a bespoke approach to every project, working closely with clients to develop tailored solutions that address their specific needs and goals. Our team of experienced engineers and product development professionals is dedicated to delivering results that exceed expectations. Operating throughout the nation, including in Beryl, New South Wales, Australia, we've had the privilege of contributing to numerous projects that have made a significant impact on local communities. Our extensive experience has equipped us with the knowledge and skills necessary to tackle even the most complex challenges, ensuring our clients receive only the best outcomes. As businesses in Beryl, New South Wales, Australia navigate the ever-evolving landscape, they can count on COLETEK's commitment to innovation, reliability, and collaboration. We're proud to be a trusted partner for those seeking to drive growth, improve efficiency, or simply find new ways to stay ahead of the curve. For businesses in Beryl, New South Wales, Australia looking to tap into our expertise and accelerate their success, we invite you to explore how COLETEK can support your organization. Contact us today to learn more about how our tailored engineering solutions can empower your business for a brighter future.