Data Recovery & Backup Solutions for Milvale

If you heard your hard drive making a ticking noise, you have a hardware issue (disconnect your hard drive right away), which is costly to fix - but in most cases we can recovery your data.

1. IC Logic Board PCB
2. Motor/Spindle
3. Physical Heads
4. Heads Movement
5. Actuator
6. Actuator Arm
7. Platters
8. Protective Cover
9. Chassis
10. Firmware Examination
11. Image Repair Drive

• Level 1 - Logical: No physical damage, Logical minor file system corruption as a result of a possible windows update, user error or possible virus.
• Level 2 - Mechanical/Logical: Disk with up to 1% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 3 - Mechanical/Logical: Disk with up to 5% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 4 - Mechanical/Logical: Disk with up to 10% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without bad sectors but with a massive logical corruption of the file system and possibly overwritten data, etc.
• Level 5 - Firmware/Mechanical/Electronic: Disk with corrupted firmware modules and with at least 1% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without physical damage but with disk encryption applied and underlying file system corruption. This level also covers electronic faults of the board PCB.
• Level 6 - Physical/Mechanical/Firmware: clean room job for physically damaged drive with either R/W heads stiction condition, or with at least one faulty R/W in the stack. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 7 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp without obvious magnetic platters damage. These jobs will be defined as recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 8 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp with obvious magnetic platters damage. These jobs will be defined as top complexity recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not – the success rate in these type of cases will be lower because of the magnetic platters damage. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption. In some of the cases only partial recovery may be possible.
• Not Recoverable: drives with excessive magnetic platters damage – usually carved rings and highly contaminated drive chamber as a result of the carved black particles. With current technology these type of jobs are beyond recovery.

The hard drive recovery process is very complex and requires a lot of specialized data recovery engineering tools and knowledge, and level 6+ failures require a class 100 cleanroom.

At COLETEK, we're proud to be a trusted multidisciplinary Australian engineering and product development company established in 2001. For over two decades, our team has been dedicated to delivering world-class solutions that empower businesses throughout the country, including those based in the vibrant region of Milvale, New South Wales, Australia. As your partner in innovation, we understand the unique challenges faced by businesses operating across Milvale and surrounding areas. Our extensive experience spans multiple disciplines, ensuring that every project is approached with a comprehensive understanding of its complexities. With COLETEK by your side, you can count on reliable collaboration, cutting-edge capabilities, and expert guidance to drive your projects forward. Through our work with various industries and organizations, we've developed a keen sense of what it takes to succeed in the region. Whether you're looking to optimize production processes, improve operational efficiency, or create new products and services that define markets, our engineering and product development expertise is here to support your growth. As a local business ourselves, we appreciate the importance of community engagement and strive to build long-term relationships with our clients. COLETEK's capabilities are not limited to a specific industry or sector; we're adept at serving businesses across Milvale, New South Wales, Australia by adopting a problem-solving approach that addresses your unique needs. Our team excels in designing, developing, testing, and implementing innovative solutions tailored to your specific requirements. By partnering with us, you can rest assured that your projects are in the best possible hands.