Data Recovery & Backup Solutions for Ilford

If you heard your hard drive making a ticking noise, you have a hardware issue (disconnect your hard drive right away), which is costly to fix - but in most cases we can recovery your data.

1. IC Logic Board PCB
2. Motor/Spindle
3. Physical Heads
4. Heads Movement
5. Actuator
6. Actuator Arm
7. Platters
8. Protective Cover
9. Chassis
10. Firmware Examination
11. Image Repair Drive

• Level 1 - Logical: No physical damage, Logical minor file system corruption as a result of a possible windows update, user error or possible virus.
• Level 2 - Mechanical/Logical: Disk with up to 1% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 3 - Mechanical/Logical: Disk with up to 5% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 4 - Mechanical/Logical: Disk with up to 10% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without bad sectors but with a massive logical corruption of the file system and possibly overwritten data, etc.
• Level 5 - Firmware/Mechanical/Electronic: Disk with corrupted firmware modules and with at least 1% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without physical damage but with disk encryption applied and underlying file system corruption. This level also covers electronic faults of the board PCB.
• Level 6 - Physical/Mechanical/Firmware: clean room job for physically damaged drive with either R/W heads stiction condition, or with at least one faulty R/W in the stack. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 7 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp without obvious magnetic platters damage. These jobs will be defined as recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 8 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp with obvious magnetic platters damage. These jobs will be defined as top complexity recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not – the success rate in these type of cases will be lower because of the magnetic platters damage. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption. In some of the cases only partial recovery may be possible.
• Not Recoverable: drives with excessive magnetic platters damage – usually carved rings and highly contaminated drive chamber as a result of the carved black particles. With current technology these type of jobs are beyond recovery.

The hard drive recovery process is very complex and requires a lot of specialized data recovery engineering tools and knowledge, and level 6+ failures require a class 100 cleanroom.

At COLETEK, we're proud to be a multidisciplinary Australian engineering and product development company with nearly two decades of experience in delivering innovative solutions that drive results. Our team's collective expertise and shared passion for collaboration have earned us a trusted national reputation among businesses across Ilford, New South Wales, Australia. With our headquarters based in Ilford, New South Wales, Australia, we're uniquely positioned to support local companies and entrepreneurs who are looking to propel their products or services forward. Whether you're an established player in the market or just starting out, COLETEK is committed to providing tailored engineering and product development solutions that meet your specific needs. Our reputation for reliability, combined with our capability to navigate complex projects and deliver results on time, has made us a go-to partner for businesses operating throughout Ilford, New South Wales, Australia. From conceptualization to final production, we work closely with our clients to ensure seamless communication and optimal outcomes. By leveraging our collective expertise in engineering, product development, and project management, COLETEK is well-equipped to help you bring your vision to life. Whether you're looking to improve product performance, reduce costs, or stay ahead of the curve in a rapidly changing industry, we're here to support your goals and objectives every step of the way. As a trusted partner for businesses across Ilford, New South Wales, Australia, COLETEK is dedicated to providing exceptional engineering and product development services that drive real value. Let us help you build remarkable solutions that stand out in the market. Contact us today to discuss how our team can support your next project or innovation initiative.