Data Recovery & Backup Solutions for Hampton

If you heard your hard drive making a ticking noise, you have a hardware issue (disconnect your hard drive right away), which is costly to fix - but in most cases we can recovery your data.

1. IC Logic Board PCB
2. Motor/Spindle
3. Physical Heads
4. Heads Movement
5. Actuator
6. Actuator Arm
7. Platters
8. Protective Cover
9. Chassis
10. Firmware Examination
11. Image Repair Drive

• Level 1 - Logical: No physical damage, Logical minor file system corruption as a result of a possible windows update, user error or possible virus.
• Level 2 - Mechanical/Logical: Disk with up to 1% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 3 - Mechanical/Logical: Disk with up to 5% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 4 - Mechanical/Logical: Disk with up to 10% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without bad sectors but with a massive logical corruption of the file system and possibly overwritten data, etc.
• Level 5 - Firmware/Mechanical/Electronic: Disk with corrupted firmware modules and with at least 1% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without physical damage but with disk encryption applied and underlying file system corruption. This level also covers electronic faults of the board PCB.
• Level 6 - Physical/Mechanical/Firmware: clean room job for physically damaged drive with either R/W heads stiction condition, or with at least one faulty R/W in the stack. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 7 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp without obvious magnetic platters damage. These jobs will be defined as recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 8 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp with obvious magnetic platters damage. These jobs will be defined as top complexity recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not – the success rate in these type of cases will be lower because of the magnetic platters damage. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption. In some of the cases only partial recovery may be possible.
• Not Recoverable: drives with excessive magnetic platters damage – usually carved rings and highly contaminated drive chamber as a result of the carved black particles. With current technology these type of jobs are beyond recovery.

The hard drive recovery process is very complex and requires a lot of specialized data recovery engineering tools and knowledge, and level 6+ failures require a class 100 cleanroom.

As a multidisciplinary Australian engineering and product development company established in 2001, COLETEK is proud to serve businesses across Hampton, New South Wales, Australia, and throughout the country. With over two decades of experience, we've built a reputation for delivering innovative, reliable solutions that drive results. Our team of experts is based in Hampton, New South Wales, Australia, and is committed to collaborating with local business owners like you. We understand the unique challenges and opportunities that come with operating in Hampton, New South Wales, Australia, and the surrounding regions. By leveraging our cutting-edge capabilities and deep understanding of the local market, we help businesses overcome obstacles and seize new opportunities. At COLETEK, we're not just about providing technical expertise - we're about building long-term relationships and helping our clients achieve their goals. We take a holistic approach to engineering and product development, considering the bigger picture and working closely with our customers to deliver customized solutions that meet their specific needs. For businesses in Hampton, New South Wales, Australia and beyond, COLETEK offers a trusted partner for all your engineering and product development requirements. Whether you're looking to optimize existing operations or develop new products and services, we're here to provide the guidance, expertise, and support you need to succeed. By working with COLETEK, businesses in Hampton, New South Wales, Australia can rest assured that they're getting expert advice from a company that's committed to their success. Our team is dedicated to providing exceptional service, ensuring that our clients receive timely and effective solutions that address their unique challenges.