Data Recovery & Backup Solutions for Bimbi

If you heard your hard drive making a ticking noise, you have a hardware issue (disconnect your hard drive right away), which is costly to fix - but in most cases we can recovery your data.

1. IC Logic Board PCB
2. Motor/Spindle
3. Physical Heads
4. Heads Movement
5. Actuator
6. Actuator Arm
7. Platters
8. Protective Cover
9. Chassis
10. Firmware Examination
11. Image Repair Drive

• Level 1 - Logical: No physical damage, Logical minor file system corruption as a result of a possible windows update, user error or possible virus.
• Level 2 - Mechanical/Logical: Disk with up to 1% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 3 - Mechanical/Logical: Disk with up to 5% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 4 - Mechanical/Logical: Disk with up to 10% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without bad sectors but with a massive logical corruption of the file system and possibly overwritten data, etc.
• Level 5 - Firmware/Mechanical/Electronic: Disk with corrupted firmware modules and with at least 1% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without physical damage but with disk encryption applied and underlying file system corruption. This level also covers electronic faults of the board PCB.
• Level 6 - Physical/Mechanical/Firmware: clean room job for physically damaged drive with either R/W heads stiction condition, or with at least one faulty R/W in the stack. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 7 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp without obvious magnetic platters damage. These jobs will be defined as recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 8 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp with obvious magnetic platters damage. These jobs will be defined as top complexity recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not – the success rate in these type of cases will be lower because of the magnetic platters damage. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption. In some of the cases only partial recovery may be possible.
• Not Recoverable: drives with excessive magnetic platters damage – usually carved rings and highly contaminated drive chamber as a result of the carved black particles. With current technology these type of jobs are beyond recovery.

The hard drive recovery process is very complex and requires a lot of specialized data recovery engineering tools and knowledge, and level 6+ failures require a class 100 cleanroom.

As a business owner or decision-maker based in Bimbi, New South Wales, Australia, you understand the importance of partnering with reliable, innovative, and trusted experts to drive your organization's success. COLETEK is that partner for discerning businesses like yours operating across Bimbi, New South Wales, Australia. Our mission is to deliver exceptional solutions through engineering and product development expertise, established over two decades. From our base in Bimbi, New South Wales, Australia, we've been serving businesses across the nation with trusted guidance since our inception in 2001. As a multidisciplinary Australian company, we're uniquely equipped to support local businesses like yours, offering the capability and confidence you need to achieve your goals. At COLETEK, we pride ourselves on fostering long-lasting relationships built upon collaboration, open communication, and unwavering dedication. Our team of highly skilled professionals is well-versed in designing and developing innovative products that meet the unique needs of our clients' industries. By doing so, we've gained a reputation as reliable partners for businesses seeking tailored solutions. In Bimbi, New South Wales, Australia and nationwide, COLETEK remains committed to empowering local businesses with engineering and product development expertise that drives real results. Whether you're looking to launch a new product or enhance your existing processes, our team is equipped to provide the tailored support required to overcome your organization's unique challenges. By partnering with COLETEK based in Bimbi, New South Wales, Australia, you can leverage our extensive knowledge, experience, and capabilities to elevate your business operations. Trust us to help navigate complex technical landscapes, streamline processes, or develop innovative products that set your brand apart in the market.