Data Recovery & Backup Solutions for Wyee

If you heard your hard drive making a ticking noise, you have a hardware issue (disconnect your hard drive right away), which is costly to fix - but in most cases we can recovery your data.

1. IC Logic Board PCB
2. Motor/Spindle
3. Physical Heads
4. Heads Movement
5. Actuator
6. Actuator Arm
7. Platters
8. Protective Cover
9. Chassis
10. Firmware Examination
11. Image Repair Drive

• Level 1 - Logical: No physical damage, Logical minor file system corruption as a result of a possible windows update, user error or possible virus.
• Level 2 - Mechanical/Logical: Disk with up to 1% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 3 - Mechanical/Logical: Disk with up to 5% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 4 - Mechanical/Logical: Disk with up to 10% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without bad sectors but with a massive logical corruption of the file system and possibly overwritten data, etc.
• Level 5 - Firmware/Mechanical/Electronic: Disk with corrupted firmware modules and with at least 1% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without physical damage but with disk encryption applied and underlying file system corruption. This level also covers electronic faults of the board PCB.
• Level 6 - Physical/Mechanical/Firmware: clean room job for physically damaged drive with either R/W heads stiction condition, or with at least one faulty R/W in the stack. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 7 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp without obvious magnetic platters damage. These jobs will be defined as recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 8 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp with obvious magnetic platters damage. These jobs will be defined as top complexity recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not – the success rate in these type of cases will be lower because of the magnetic platters damage. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption. In some of the cases only partial recovery may be possible.
• Not Recoverable: drives with excessive magnetic platters damage – usually carved rings and highly contaminated drive chamber as a result of the carved black particles. With current technology these type of jobs are beyond recovery.

The hard drive recovery process is very complex and requires a lot of specialized data recovery engineering tools and knowledge, and level 6+ failures require a class 100 cleanroom.

As a business owner in Wyee, New South Wales, Australia, you understand the importance of having a reliable partner to help drive innovation and growth. With over 20 years of experience as a multidisciplinary Australian engineering and product development company established in 2001, COLETEK is proud to offer its expertise to businesses like yours throughout Wyee, New South Wales, Australia. Our team has a nationally recognized reputation for delivering innovative solutions that meet the unique needs of each client. Based in Wyee, New South Wales, Australia, we take pride in our ability to connect with local entrepreneurs and executives who share our passion for engineering and product development. By leveraging our expertise, you can trust that your project will receive the attention it deserves. At COLETEK, collaboration is at the heart of everything we do. We believe in building strong relationships with our clients by actively listening to their needs and working closely together to turn ideas into reality. Our engineers and designers are highly skilled professionals who understand the importance of precision and reliability. With our support, you can rest assured that your project will meet even the most demanding standards. Whether you're looking to improve existing products or develop new ones from scratch, we have the capability to help. From conceptual design through prototyping and testing to production readiness, our team has proven expertise in supporting businesses throughout Wyee, New South Wales, Australia and beyond. If your business is ready to take the next step, look no further than COLETEK. Let us help you bring your vision to life with a focus on reliability, collaboration, and capability. Contact Us