Data Recovery & Backup Solutions for Latham

If you heard your hard drive making a ticking noise, you have a hardware issue (disconnect your hard drive right away), which is costly to fix - but in most cases we can recovery your data.

1. IC Logic Board PCB
2. Motor/Spindle
3. Physical Heads
4. Heads Movement
5. Actuator
6. Actuator Arm
7. Platters
8. Protective Cover
9. Chassis
10. Firmware Examination
11. Image Repair Drive

• Level 1 - Logical: No physical damage, Logical minor file system corruption as a result of a possible windows update, user error or possible virus.
• Level 2 - Mechanical/Logical: Disk with up to 1% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 3 - Mechanical/Logical: Disk with up to 5% of bad sectors and a corrupted file system as a result of the bad sectors.
• Level 4 - Mechanical/Logical: Disk with up to 10% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without bad sectors but with a massive logical corruption of the file system and possibly overwritten data, etc.
• Level 5 - Firmware/Mechanical/Electronic: Disk with corrupted firmware modules and with at least 1% of bad sectors and a corrupted file system as a result of the bad sectors. Or a disk without physical damage but with disk encryption applied and underlying file system corruption. This level also covers electronic faults of the board PCB.
• Level 6 - Physical/Mechanical/Firmware: clean room job for physically damaged drive with either R/W heads stiction condition, or with at least one faulty R/W in the stack. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 7 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp without obvious magnetic platters damage. These jobs will be defined as recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption.
• Level 8 - Physical/Mechanical/Firmware: clean room job, damaged R/W heads stack or damaged R/W Pre-amp with obvious magnetic platters damage. These jobs will be defined as top complexity recovery attempts and will require rebuilding the drive in a clean room from donor parts. Only after rebuilding the drive we will be able to assess if the data will be recoverable or not – the success rate in these type of cases will be lower because of the magnetic platters damage. In most of the cases these drives will also show bad sectors and possibly firmware corruption and file system corruption. In some of the cases only partial recovery may be possible.
• Not Recoverable: drives with excessive magnetic platters damage – usually carved rings and highly contaminated drive chamber as a result of the carved black particles. With current technology these type of jobs are beyond recovery.

The hard drive recovery process is very complex and requires a lot of specialized data recovery engineering tools and knowledge, and level 6+ failures require a class 100 cleanroom.

As a leading multidisciplinary engineering and product development company established in 2001, COLETEK has earned a reputation for delivering reliable solutions that meet the unique needs of businesses across Latham, Australian Capital Territory. Our team of experienced professionals is dedicated to empowering local industries with innovative products and services that drive growth and innovation. With over two decades of experience supporting businesses in Latham, Australian Capital Territory, we've developed a deep understanding of the region's specific challenges and opportunities. Our expertise spans multiple sectors, allowing us to approach each project with a broad perspective and a commitment to collaboration. Whether you're seeking innovative product development or reliable engineering support, COLETEK is the trusted partner for businesses across Latham, Australian Capital Territory. At COLETEK, we believe that capability lies at the heart of successful partnerships. We take pride in our ability to bring together diverse skills and expertise under one roof, providing a seamless and integrated experience for our clients. By building strong relationships with local businesses, we're able to tailor our solutions to meet their unique needs and goals. Operating throughout Latham, Australian Capital Territory, and beyond, COLETEK is proud of its national reputation as a trusted partner in engineering and product development. Our commitment to reliability, innovation, and collaboration has earned us a spot among the industry's leading players. As you navigate the complexities of doing business in Latham, Australian Capital Territory, consider partnering with a team that shares your values and understands your challenges. At COLETEK, we're passionate about supporting local businesses and driving growth through innovative engineering solutions. Let us join forces to build something remarkable together.